Kodak 3000 series User Manual page 55

Understanding the Control
Panel and Printer Controls
Cut Pos.
Media Cut
Copy
Ink Density
Dist. Adj.
Centro Mode
Timing
xxx.xxx.xxx.xxx
Network
Utility ErrorDisplay
Initial
Dump
Off / On
No / Yes Initial All:
Initial Command
Initial Functi.
Initial Centro
Initial Network
DataDump:
Data / Standard
Off / Auto / Manual
1 to 99
Normal / Thin / Faint
No / Confirm / Clear / Change
Bi Centro / Centro
A-B / B-A
000.000.000.000 to
255.255.255.255
No / OK
No / OK
No / OK
No / OK
No / OK
No / Yes
Yes Dump: Start-End / All
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
Specifies cutting position on roll media
following data or standard media size.
Sets up automatic sheet-off set up.
Sets number of copies.
Selects ink density/drop size in function of
media and ink type.
Selects between unidirectional and ECP high
speed.
Selects ACK timing for BUSY state.
Allows set up of IP address
Shows or hides simple error.
Initializes printer set up.
Initializes printer set up.
Initializes printer set-p.
Initializes printer setup.
Initializes printer setup.
Sets up data dump mode.
50