Replacing The Media Cutter Blade - Kodak 3000 series User Manual

Large format inkjet printers

Hide thumbs Also See for 3000 series:

Table of Contents

Maintaining

the Printer

REPLACING THE MEDIA CUTTER BLADE

Depending upon the roll media used, dust gathers in the cutter slot and on the cutter

blade edge causing irregular cuts. If necessary, replace or clean the cutting blade and

clean the cutter slot. We recommend replacing the cutting blade regularly.

1. Turn the printer OFF, and make sure that the media hold lever is in the down

position. Move the printing head to the center of the printer.

2. Push the cutter head down, rotate the cutter arm toward you, and remove the cutting

blade. Clean the cutting blade with a dry cloth, or replace it.

CAUTION:

There is a spring fitted in the hole of cutter head. Be careful not to

lose it while replacing the cutting blade.

KODAK PROFESSIONAL Large

Format 3000 Series Inkjet Printers

Table of Contents

Professional 3000 series