Kodak 3000 series User Manual page 37

Setting up the Printer
The "ink refill" message means that ink is being filled into the ink supply system (tubing
and head).
CAUTION:
During ink replenishment, do not turn off the power to the printer.
This may cause damage to your printer. If a power failure occurs
during ink replenishment, do the following:
1. Turn the power switch OFF and then ON. Make sure that no
2. Perform a cleaning cycle, and check the test prints.
3. Repeat Step 2 until print quality is acceptable.
NOTE:
error messages display on the control panel.
If ink cassettes are installed and the message "NO
CARTRIDGE" appears, the ink cassettes are not installed
correctly. Remove the cassette(s) indicated and install it (them)
correctly.
If initial ink replenishment fails, clean the head. If the ink
replenishment does not start after several head cleaning cycles,
contact your dealer.
If the control panel displays "not original ink" contact your ink
supplier to order KODAK PROFESSIONAL ink cassettes.
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
32