The Remote Mgmt Screen - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 20 Remote MGMT

20.2 The Remote MGMT Screen

Use this screen to decide what services you may use to access which Device interface. Click
Maintenance > Remote MGMT to open the following screen.
Figure 122 Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 81 Maintenance > Remote MGMT
LABEL
Services
LAN/WLAN
WAN
Port
Apply
Cancel
256
DESCRIPTION
This is the service you may use to access the Device.
Select the Enable check box for the corresponding services that you want to
allow access to the Device from the LAN and WLAN.
Select the Enable check box for the corresponding services that you want to
allow access to the Device from the WAN.
You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
P-2812HNU(L)-Fx Series User's Guide