ZyXEL Communications P-2812HNU-51c User Manual page 113

Table 12 Broadband Add/Edit: Bridge (VDSL/EtherWAN) (continued)
LABEL
Bridge Group
Apply
Back
If you select ADSL as the interface type, the following screen appears.
Figure 28 Broadband Add/Edit: Bridge (ADSL)
The following table describes the fields in this screen.
Table 13 Broadband Add/Edit: Bridge (ADSL)
LABEL
General
Name
Type
P-2812HNU(L)-Fx Series User's Guide
DESCRIPTION
Select the LAN/WLAN port(s) from which traffic will be forwarded to the WAN
interface directly.
Select a port from the Available LAN/WLAN Port(s) list and click Add >> to
add it to the Bridged LAN/WLAN Port(s) list.
If you want to remove a port from the Bridged LAN/WLAN Port(s) list,
select it and click Remove <<.
You cannot configure a QoS class for traffic from the LAN port which is selected
here.
Click Apply to save your changes.
Click Back to return to the previous screen.
DESCRIPTION
Enter a service name of the connection.
Select ADSL as the interface for which you want to configure here. The Device
uses the ADSL technology for data transmission over the DSL port.
Chapter 5 Broadband
113