ZyXEL Communications P-2812HNU-51c User Manual page 104

Chapter 5 Broadband
5.2.1.4 Routing- PPPoA
Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon
next to the connection you want to configure. Select ADSL as the interface type, Routing as the
encapsulation mode and PPPoA as the WAN service type.
Figure 23 Broadband Add/Edit: Routing- PPPoA (ADSL)
Figure 24 6to4 Tunneling
The following table describes the fields in this screen.
Table 10 Broadband Add/Edit: Routing- PPPoA (ADSL)
LABEL
General
Name
Type
Mode
104
DESCRIPTION
Enter a service name of the connection.
Select an interface for which you want to configure here.
ADSL: The Device uses the ADSL technology for data transmission over the
DSL port.
EtherWAN: The Device transmits data over the Ethernet WAN port. Select this
if you have a DSL router or modem in your network already.
Select Routing (default) from the drop-down list box if your ISP give you one
IP address only and you want multiple computers to share an Internet account.
P-2812HNU(L)-Fx Series User's Guide