ZyXEL Communications P-2812HNU-51c User Manual page 96

Chapter 5 Broadband
Table 7 Broadband Add/Edit: Routing- PPPoE (VDSL) (continued)
LABEL
6RD Enable
6to4 Tunneling
Relay Server IP
IPv6 DNS Server
Obtain IPv6 DNS
info Automatically
Use the following
Static DNS IPv6
Address
Primary IPv6
DNS Server
Secondary IPv6
DNS Server
Apply
Back
96
DESCRIPTION
Select this option to enable IPv6 Rapid Deployment. By enabling this function,
the Device uses an ISP's IPv6 address prefix instead of the 2002::/48 prefix.
The operational domain of 6RD is limited to and controlled by the ISP's
network. 6RD hosts are ensured to be reachable from all native IPv6 addresses
as 6RD only uses relay servers within control of the ISP.
This option is not available if your WAN Service Type is PPPoE.
Enter the tunneling relay server's IPv4 address in this field. If your WAN
Service Type is PPPoE, you need to enter this field in order to use 6to4
Tunneling.
Select whether you want to obtain the IPv6 DNS server addresses
automatically or configure them manually.
Select this to have the Device get the IPv6 DNS server addresses from the ISP
automatically.
Select this to have the Device use the DNS server addresses you configure
manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
Click Apply to save your changes.
Click Back to return to the previous screen.
P-2812HNU(L)-Fx Series User's Guide