Setting Up Nat Port Forwarding - ZyXEL Communications P-2812HNU-51c User Manual

802.11n wireless vdsl2 voip combo wan iad
Hide thumbs Also See for P-2812HNU-51c:
Table of Contents

Advertisement

11 If you cannot access the Internet go back to the Profile screen, select the profile you are using and
click Edit. Check the details you entered previously. Also, refer to the Troubleshooting section of
this User's Guide or contact your network administrator if necessary.

3.4 Setting Up NAT Port Forwarding

In this tutorial, you manage the Doom server on a computer behind the Device. In order for players
on the Internet (like A in the figure below) to communicate with the Doom server, you need to
configure the port settings and IP address on the Device. Traffic should be forwarded to the port
666 of the Doom server computer which has an IP address of 192.168.1.34.
Tutorial: NAT Port Forwarding Setup
D=192.168.1.34
You may set up the port settings by configuring the port settings for the Doom server computer
(see
Chapter 10 on page 190
Click Network Setting > NAT > Port Forwarding. Click Add new rule.
1
P-2812HNU(L)-Fx Series User's Guide
LAN
port 666
for more information).
Chapter 3 Tutorials
WAN
A
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents