ZyXEL Communications P-2812HNU-51c User Manual page 75

Go to Network Setting > QoS > Class Setup. Click Add new Classifier to create a new class.
3
Check Active and follow the settings as shown in the screen below. Then click Apply.
Tutorial: Advanced > QoS > Class Setup
Class Name
To Queue
From Interface
Ether Type
MAC Address
IP Address
IP Protocol
This maps e-mail traffic to queue 7 created in the previous screen (see the IP Protocol field). This
also maps your computer's IP address and MAC address to queue 7 (see the Source fields).
P-2812HNU(L)-Fx Series User's Guide
Give a class name to this traffic, such as Email in this
example.
Link this to a queue created in the QoS > Queue Setup
screen, which is the Email queue created in this example.
This is the interface from which the traffic will be coming
from. Select Lan.
Select IP to identify the traffic source by its IP address or
MAC address.
Type the MAC address of your computer -
AA:FF:AA:FF:AA:FF. Type the MAC Mask if you know it.
Type the IP address of your computer - 192.168.1.23.
Type the IP Subnet Mask if you know it.
Select User defined and enter 25 as the IP Protocol.
Chapter 3 Tutorials
75