ZyXEL Communications P-2812HNU-51c User Manual page 108

Chapter 5 Broadband
5.2.1.5 Routing- IPoE (ADSL)
Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon
next to the connection you want to configure. Select ADSL as the interface type, Routing as the
encapsulation mode and IP over Ethernet as the WAN service type.
Figure 25 Broadband Add/Edit: Routing- IPoE (ADSL)
Figure 26 6to4 Tunneling
The following table describes the fields in this screen.
Table 11 Broadband Add/Edit: Routing- IPoE (ADSL)
LABEL
General
Name
Type
Mode
WAN Service Type
108
DESCRIPTION
Enter a service name of the connection.
Select ADSL as the interface that you want to configure. The Device uses the
ADSL technology for data transmission over the DSL port.
Select Routing (default) from the drop-down list box if your ISP give you one
IP address only and you want multiple computers to share an Internet account.
This field is available only when you select Routing in the Mode field. Select
IPoE as the method of encapsulation used by your ISP.
• IP over Ethernet - In this type of Internet connection, IP packets are
routed between the Ethernet interface and the WAN interface and then
formatted so that they can be understood in a bridged environment.
P-2812HNU(L)-Fx Series User's Guide