ZyXEL Communications P-2812HNU-51c User Manual page 72

Chapter 3 Tutorials
You need to specify a static routing rule on the Device to specify R as the router in charge of
forwarding traffic to N2. In this case, the Device routes traffic from A to R and then R routes the
traffic to B.This tutorial uses the following example IP settings:
N1
Table 3 IP Settings in this Tutorial
DEVICE / COMPUTER
The Device's WAN
The Device's LAN
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Click Network Setting > Routing. Click Add New Static Route.
1
Configure the Static Route Setup screen using the following settings:
2
• Select Active.
• Specify a descriptive name for this routing rule.
• Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
72
A
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
R
N2
B
P-2812HNU(L)-Fx Series User's Guide