ZyXEL Communications P-2812HNU-51c User Manual page 74

Chapter 3 Tutorials
Note: QoS is applied to traffic flowing out of the Device.
Traffic that does not match this class is assigned a priority queue based on the internal QoS
mapping table on the Device.
QoS Example
Your computer
IP=192.168.1.23
and/or
MAC=AA:FF:AA:FF:AA:FF
E-mail: Queue 7
Click Network Setting > QoS > General and check Active. Set your WAN Managed Upstream
1
Bandwidth to 10,000 kbps (or leave this blank to have the Device automatically determine this
figure). Click Apply to save your settings.
Tutorial: Advanced > QoS
Go to Network Setting > QoS > Queue Setup. Click Add new Queue to create a new queue. In
2
the screen that opens, check Active and enter or select the following values, then click Apply.
• Name: Email
• Priority: 7 (High)
• Weight: 15
• Rate Limit: 5,000 (kbps)
Tutorial: Advanced > QoS > Queue Setup
74
ZyXEL Device
A colleague's computer
Other traffic: Automatic classifier
DSL
10,000 kbps
P-2812HNU(L)-Fx Series User's Guide