ZyXEL Communications P-2812HNU-51c User Manual page 103

Table 9 Broadband Add/Edit: Routing- PPPoE (ADSL) (continued)
LABEL
Obtain IPv6
Address
Automatically
Enable Prefix
Delegation
Static IPv6 Address
IPv6 Address
Prefix length
IPv6 Default
Gateway
6to4 Tunneling
6RD Enable
6to4 Tunneling
Relay Server IP
IPv6 DNS Server
Obtain IPv6 DNS
info Automatically
Use the following
Static DNS IPv6
Address
Primary IPv6
DNS Server
Secondary IPv6
DNS Server
Apply
Back
P-2812HNU(L)-Fx Series User's Guide
DESCRIPTION
Select this option if you want to have the Device use the IPv6 prefix from the
connected router's Router Advertisement (RA) to generate an IPv6 address.
Select this to enable Prefix Delegation. This enables an IPv6 router to use the
IPv6 prefix (network address) received from the ISP (or a connected uplink
router) for its LAN.
Select this option if you have a fixed IPv6 address assigned by your ISP.
Enter the static IPv6 address provided by your ISP using colon (:) hexadecimal
notation.
Enter the bit number of the IPv6 subnet mask provided by your ISP.
Enter the IPv6 address of the default outgoing gateway using a colon (:)
hexadecimal notation.
Select 6to4 if the Device is connected to a network that has both IPv6 and IPv4
and the IPv4 addresses are public IP addresses. In this mode, the Device can
convert an IPv4 address directly to an IPv6 address. The format is:
2002:[IPv4 address in hexadecimal]::/48
If you select this option, the fields shown in
Select this option to enable IPv6 Rapid Deployment. By enabling this function,
the Device uses an ISP's IPv6 address prefix instead of the 2002::/48 prefix.
The operational domain of 6RD is limited to and controlled by the ISP's
network. 6RD hosts are ensured to be reachable from all native IPv6 addresses
as 6RD only uses relay servers within control of the ISP.
This option is not available if your WAN Service Type is PPPoE or PPPoA.
Enter the tunneling relay server's IPv4 address in this field. If your WAN
Service Type is PPPoE or PPPoA, you need to enter this field in order to use
6to4 Tunneling.
Select whether you want to obtain the IPv6 DNS server addresses
automatically or configure them manually.
Select this to have the Device get the IPv6 DNS server addresses from the ISP
automatically.
Select this to have the Device use the DNS server addresses you configure
manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
Click Apply to save your changes.
Click Back to return to the previous screen.
Chapter 5 Broadband
Figure 22 appear.
103