The Add New Profile Screen; Table 4 Windows: Site Survey - ZyXEL Communications G-210H User Manual

Chapter 4 ZyXEL Utility - Windows
The following table describes the labels in this screen.

Table 4 Windows: Site Survey

LABEL
Available Network
List
,
,
or
SSID
Channel
Signal
Network Type
Security
MAC Address
Scan
Connect
Add

4.3.1 The Add New Profile Screen

Click Add in the Site Survey screen (you can also press Add in the Profile screen). An Add
New Profile screen displays as shown next. The screen varies slightly depending on the
network type you selected.
32
DESCRIPTION
Click a column heading to sort the entries.
Click an entry in the Available Network List table to display the information of the
selected wireless device.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless
security is deactivated.
This field displays the SSID (Service Set IDentifier) of each wireless device.
This field displays the channel number used by each wireless device.
This field displays the signal strength of each wireless device.
This field displays the network type (Infrastructure or Ad-hoc) of the wireless
device.
This field shows whether data encryption is activated (WEP, WPA-PSK, WPA,
WPA2, WPA2-PSK, 802.1X) or inactive (DISABLE).
This field displays the MAC address of the wireless device.
The text box under the available network table shows whether the G-210H is
connected to a wireless network and to which network the G-210H is connected.
Click Scan to search for available wireless devices within transmission range.
(Windows XP/2000 only)
Click Connect to associate to the selected wireless device.
Click Add to create a new profile. See
information.
Section 4.5 on page 46 for more
G-210H User's Guide