Chapter 5 ZyXEL Utility - Mac OS X
The following table describes the labels in this screen.
Table 22 Mac OS X: Link Status
LABEL
Status
Current Channel
Current Tx Rate
Throughput
(Kbits/sec)
Link Quality
Signal Strength
5.6 The Site Survey Screen
Use this screen to view available networks and connect to a network.
Figure 41 Mac OS X: Site Survey
58
DESCRIPTION
This displays the SSID and BSSID of the network. The SSID is a descriptive name
that identifies the wireless network. The BSSID is the MAC address of the AP or
peer computer with which the G-210H is associated
This displays the channel number and frequency currently used by the wireless
network.
This displays the current data transmission rate in megabits per second (Mbps).
This field displays the current transmitted (Tx) and received (Rx) throughput in
kilobits per second (kbps).
This field displays whether the link quality is Weak, Normal or Good, and the
percentage of packets transmitted successfully. The status bar shows the quality
of wireless connection. If there are too many wireless stations in a wireless
network, collisions may occur which could result in a loss of messages even
though you have high signal strength.
This field displays whether the signal strength is Weak, Normal or Good, and the
percentage of G-210H's signal strength.
G-210H User's Guide