Figure 24 Security Setting: Wpa/Wpa2: Certificate; Table 10 Security Setting: Wpa/Wpa2: Certificate - ZyXEL Communications G-210H User Manual

Chapter 4 ZyXEL Utility - Windows

Figure 24 Security Setting: WPA/WPA2: Certificate

The following table describes the labels in Security Setting: WPA/WPA2: Certificate screen.

Table 10 Security Setting: WPA/WPA2: Certificate

LABEL
Validate Server
Certificate
Certificate issuer
must be
Allow
intermediate
certificates
Server name must
be
Server name must
match exactly
Domain name
must end in
specified name
Back
Save
Exit
4.4.1.4 IEEE 802.1x
Configure IEEE 802.1x security with various authentication methods in this screen.
This screen is only available to Windows XP/2000 users. Windows Vista users
go to Section 4.4.2 on page
40
DESCRIPTION
Select the check box to check the certificate of the authentication server.
The fields below display only when the Validate Server Certificate check box is
selected.
Select a trusted CA (certification authority) to accept only certificates signed by the
selected CA or select Any Trusted CA to accept certificates signed by any CAs.
Select the check box to accept an intermediate certificate which is issued by the
Trusted Root CA.
Enter the name of the authentication server. You can use up to 19 English
keyboard characters. Spaces are allowed.
Select this option to allow only the authentication server whose server name is
exactly the same as what you configured above.
Select this option to allow only the authentication server whose domain name
ends with what you configured above.
For example, if you entered "org.com" in the Server name must be field, a server
with the domain name of either abc.org.com or 123.org.com is allowed.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Save to confirm your selections and advance to the Link Info screen.
Click Exit to return to the Site Survey screen without saving.
43.
G-210H User's Guide