Figure 23 Security Setting: Wpa/Wpa2: Authentication; Table 8 Security Setting: Wpa/Wpa2: Encryption; Table 9 Security Setting: Wpa/Wpa2: Authentication - ZyXEL Communications G-210H User Manual

Chapter 4 ZyXEL Utility - Windows
The following table describes the labels in the WPA(2) screen.

Table 8 Security Setting: WPA/WPA2: Encryption

LABEL
Security
Encryption
Back
Save
Exit
4.4.1.3.2 Authentication
This screen is only available to Windows XP/2000 users. Windows Vista users
go to Section 4.4.2 on page

Figure 23 Security Setting: WPA/WPA2: Authentication

The following table describes the labels in Security Setting: WPA/WPA2: Authentication
screen.

Table 9 Security Setting: WPA/WPA2: Authentication

LABEL
Authentication
Type
Session
Resumption
38
DESCRIPTION
Select WPA or WPA2 from the drop-down list.
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to Section 3.2.1.3 on page 27
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Save to confirm your selections and advance to the Link Info screen.
Click Exit to return to the Site Survey screen without saving.
43.
DESCRIPTION
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS, TTLS
and PEAP.
Select Enable to turn on session resumption (EAP fast re-authentication). This
allows a client to attempt a fast reconnect to a server if the server and client have
already established an identifier in a previous connection. The key was stored and
full handshakes are not required.
Otherwise, select Disable to turn off session resumption.
for more information.
G-210H User's Guide