Figure 19 Profile: Add New Profile; Table 12 Profile: Add New Profile - ZyXEL Communications ZyXEL ZyAIR G-260 User Manual

Figure 19 Profile: Add New Profile

The following table describes the labels in this screen.

Table 12 Profile: Add New Profile

LABEL
Add New Profile
Profile Name
SSID
Network Type
Next
Exit
Scan Info
,
,
or
SSID
Scan
Select
Chapter 3 ZyXEL Utility Configuration
DESCRIPTION
Enter a descriptive name in this field.
Select an available wireless device in the Scan Info table and click Select, or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, leave this field blank to have the ZyXEL G-260 associate to
or roam between any infrastructure wireless networks.
Select the Infrastructure radio button to associate to an AP. Select the Ad-Hoc
radio button to associate to a peer computer.
Click Next to go to the next screen.
Click Exit to go back to the previous screen without saving.
This table displays the information of the available wireless networks within the
transmission range.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
This field displays the SSID (Service Set IDentifier) of each wireless device.
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the ZyXEL G-260 associates to the selected
wireless network only.
ZyXEL G-260 User's Guide
44