ZyXEL Communications G-210H User Manual page 68

Chapter 7 Troubleshooting
The computer with the G-210H installed cannot communicate with the other
computer(s).
In Infrastructure Mode
1 Make sure that the AP and the associated computers are turned on and working properly.
2 Make sure the G-210H computer and the associated AP use the same SSID.
3 Change the AP and the associated wireless clients to use another radio channel if
interference is high.
4 Make sure that the computer and the AP share the same security option and key. Verify
the settings in the Profile Security Setting screen.
5 If you are using WPA(2) or WPA(2)-PSK security, try changing your encryption type
from TKIP to AES or vice versa.
In Ad-Hoc (IBSS) Mode
1 Verify that the peer computer(s) is turned on.
2 Make sure the G-210H computer and the peer computer(s) are using the same SSID and
channel.
3 Make sure that the computer and the peer computer(s) share the same security settings.
4 Change the wireless clients to use another radio channel if interference is high.
68
G-210H User's Guide