Table 3 Windows: Link Info (continued)
LABEL
Rx
Total Transmit
Total Receive
Signal Strength
Link Quality
Noise Level
4.3 The Site Survey Screen
Use the Site Survey screen to scan for available networks and set up a profile.
Figure 15 Windows: Site Survey
G-210H User's Guide
DESCRIPTION
This field displays the current receiving throughput in kilobits per second (Kbps).
This field displays the total number of data frames transmitted.
This field displays the total number of data frames received.
This field displays whether the signal strength is Weak, Normal or Good, and the
percentage of the G-210H's signal strength. The status bar shows the strength of
the signal. The signal strength mainly depends on the antenna output power and
the distance between your G-210H and the AP or peer computer.
This field displays whether the link quality is Weak, Normal or Good, and the
percentage of packets transmitted successfully. The status bar shows the quality
of wireless connection. If there are too many wireless stations in a wireless
network, collisions may occur which could result in a loss of messages even
though you have high signal strength.
This field displays whether the noise level is Low or High, and the percentage of
noise in wireless transmissions. The status bar shows the level of noise.
Chapter 4 ZyXEL Utility - Windows
31