Table 12 Security Setting: Ieee 802.1X: Authentication - ZyXEL Communications G-210H User Manual

Chapter 4 ZyXEL Utility - Windows
The following table describes the labels in the Security Setting: IEEE 802.1x: Authentication
screen.

Table 12 Security Setting: IEEE 802.1x: Authentication

LABEL
Authentication
Type
Session
Resumption
Login Name
Password
Certification
Change
PEAP Inner EAP
TTLS Inner
authentication
Back
Next
Exit
4.4.1.4.2 Certificate
This screen is only available to Windows XP/2000 users. Windows Vista users
go to Section 4.4.2 on page
42
DESCRIPTION
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS, TTLS
and PEAP.
Select Enable to turn on session resumption (EAP fast re-authentication). This
allows a client to attempt a fast reconnect to a server if the server and client have
already established an identifier in a previous connection. The key was stored and
full handshakes are not required.
Otherwise, select Disable to turn off session resumption.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the Authentication Type field.
Specify the location and name of a certificate used by the authentication server to
authenticate the G-210H. Otherwise, click Change to locate it.
Note: You must first have and obtain the certificate(s) from a
certificate authority (CA). Consult your network administrator
for more information.
This field is only available when you select TLS in the Authentication Type field.
Click this button to display a screen where you can select a certificate and click
Apply. If you didn't get the certificate first, no certificate displays in the screen.
This field is only available when you select PEAP in the Authentication Type
field.
Select the PEAP method used by the RADIUS server or AP for client
authentication. Options are EAP-MS CHAP v2 or EAP-TLS.
This field is only available when you select TTLS in the Authentication Type
field.
Select a TTLS protocol that the RADIUS server uses.
Options are CHAP, MS-CHAP, MS-CHAP-V2, PAP and EAP-MD5.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the next screen.
Click Exit to return to the Site Survey screen without saving.
43.
G-210H User's Guide