ZyXEL Communications G-210H User Manual page 39

Table 9 Security Setting: WPA/WPA2: Authentication
LABEL
Login Name
Password
Certification
Change
PEAP Inner EAP
TTLS Inner
authentication
Back
Next
Exit
4.4.1.3.3 Certificate
Use this screen to select the authentication method used on your network.
This screen is only available to Windows XP/2000 users. Windows Vista users
go to Section 4.4.2 on page
G-210H User's Guide
DESCRIPTION
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the Authentication Type field.
Specify the location and name of a certificate used by the authentication server to
authenticate the G-210H. Otherwise, click Change to locate it.
Note: You must first obtain the certificate(s) from a certificate
authority (CA). Consult your network administrator for more
information.
This field is only available when you select TLS in the Authentication Type field.
Click this button to display a screen where you can select a certificate and click
Apply. If you didn't get the certificate first, no certificate displays in the screen.
This field is only available when you select PEAP in the Authentication Type
field.
Select the PEAP method used by the RADIUS server or AP for client
authentication. Options are EAP-MS CHAP v2 or EAP-TLS.
This field is only available when you select TTLS in the Authentication Type
field.
Select a TTLS protocol that the RADIUS server uses.
Options are CHAP, MS-CHAP, MS-CHAP-V2, PAP and EAP-MD5.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the next screen.
Click Exit to return to the Site Survey screen without saving.
43.
Chapter 4 ZyXEL Utility - Windows
39