2000, Windows XP or Windows Vista • Windows 98 SE users may need the Windows 98 SE CD. Note for Windows Vista Users: Some features in the ZyXEL utility are not available when using Windows Vista. Please refer to the User’s Guide for more information.
Page 3
1 Installation The installation procedures are similar for all supported Windows versions. Install the ZyXEL Utility before you insert the G- 202. 1 Insert the included CD into the CD-ROM drive on your computer. When the following screen displays, click Setup.
Page 4
2 Select your language and click OK. 3 The following screen displays. Click Next. 4 Select Driver and Utility to install both ZyXEL utility and driver on your computer. If you want to install the driver only and use Wireless Zero Configuration (WZC) with Windows XP, select Driver only.
G-202’s lights turn on if it is properly inserted. Never bend, force or twist the G-202 into the port. After you install the ZyXEL utility and insert the G-202, an icon appears in the system tray (typically at the bottom of the desktop). If the...
Page 6
G-202’s PIN (Personal Identification Number) into the configuration screen of an Access Point (AP). See section 2.3. 2.1 Open the Utility 1 After you install the ZyXEL utility and insert the G-202, an icon appears in the system tray. Double- click the...
Page 7
Info screen displays. If the icon does not display, uninstall and re- install the ZyXEL utility. See the User’s Guide for how to uninstall the utility. The G-202 automatically connects to an available wireless network without security enabled. However, this wireless network may not be connected to the Internet.
2 In the Adapter screen, select WPS (Wi-Fi Protected Setup) and PBC (Push Button Configuration). 3 Click Start. 4 Press the WPS button on your wireless AP (ZyXEL’s NWA570N is shown as an example). It doesn’t matter...
Page 9
ENGLISH which button is pressed first. You must press the second button within two minutes of pressing the first one. G-202 Internet 5 The AP and the G-202 establish a secure connection. This can take up to two minutes. 6 You are now ready to connect to the Internet wirelessly through your G-202.
Page 10
2 Launch your AP’s configuration utility, go to the screen where you can configure the WPS settings and enter the G-202’s PIN (an example screen from ZyXEL’s NWA570N is shown). 3 Click Start in the G-202 Adapter screen and Apply or Start in the AP’s WPS screen within two minutes.
To disable the ZyXEL utility, right-click the icon and select Exit. To activate the ZyXEL utility again, double-click the icon on your desktop or click Start > Programs > ZyXEL G- 202 Wireless Adapter Utility > ZyXEL G-202 Wireless Adapter Utility.
Page 12
Procedure to View a Product’s Certification(s) 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.
Windows XP oder Windows Vista • Benutzer von Windows 98 SE benotigen unter Umständen die Windows 98 SE CD Hinweis for Windows Vista: Einige Funktionen des ZyXEL- Programms sind bei Windows Vista nicht verfügbar. Weitere Informationen dazu finden Sie im Benutzerhandbuch.
Page 15
(entfernt) werden. 1 Installation Der Installationsvorgang ist fur alle unterstutzten Windows- Versionen ähnlich. Installieren Sie das ZyXEL-Utility-Programm bevor Sie den G-202 einsetzen. 1 Legen Sie die mitgelieferte CD in das CD-ROM-Laufwerk des Computers ein. Wenn das folgende Fenster erscheint,...
Page 16
3 Das folgende Fenster erscheint. Klicken Sie auf Next (Weiter). 4 Wählen Sie Driver (Treiber) und Utility (Hilfsprogramm), um den ZyXEL-Treiber und das ZyXEL-Utility auf dem Computer zu installieren. Wenn Sie nur den Treiber installieren aber die Wireless Zero Configuration (WZC) mit...
Page 17
DEUTSCH (Treiber). Klicken Sie auf Next (Weiter), um den vorgegebenen Zielordner zu bestätigen oder klicken Sie auf Browse (Durchsuchen), um einen anderen Ordner auszuwählen. 5 Klicken Sie auf Finish (Fertigstellen), um den Computer neu zu starten. 6 Machen Sie einen freien USB-Anschluss am Computer ausfindig.
Page 18
Versuchen Sie unter keinen Umstanden, den G- 202 durch Biegen, Drehen odersonstige Gewaltanwendung in den Einschub zu schieben. Nach Installation des ZyXEL Utility und Einschieben der G- 202 erscheint ein Symbol im Infobereich (normalerweise im unteren Bereich des Bildschirms). Wenn die Anzeige grun leuchtet und/oder auf dem Bildschirm das folgende Symbol angezeigt wird, ist das Gerät...
Page 19
Sie im Konfigurationsfenster eines APs (Access Point; Zugriffspunkt) die PIN (Personal Identification Number; Persönliche Identifikationsnummer) des G-202 eingeben. Siehe Abschnitt 2.3. 2.1 Öffnen des Utility-Programms 1 Wenn Sie das ZyXEL Utility-Programm installiert und den G- 202 angeschlossen haben, erscheint in der Taskleiste ein Symbol.
Page 20
DEUTSCH Wenn das Symbol nicht angezeigt wird, deinstallieren Sie das Utility-Programm und installieren Sie es erneut. Im Benutzerhandbuch finden Sie eine Beschreibung, wie das Utility- Programm deinstalliert wird. Der G-202 sucht automatisch nach verfügbaren Netzwerken und stellt eine Verbindung zu einem ungesicherten Drahtlosnetzwerk her.
Page 21
(Wi-Fi Protected Setup) (Wi-Fi-geschütztes Setup) und PBC (Push Button Configuration) (Tastenkonfiguration). 3 Klicken Sie auf Start. 4 Drücken Sie auf Ihrem Wireless-AP auf die WPS-Taste (als Beispiel ist der NWA570N von ZyXEL dargestellt). Dabei ist es egal, welche Taste Sie zuerst drücken.
Page 22
DEUTSCH Jedoch muss die zweite Taste spätestens zwei Minuten nach dem Drücken der ersten Taste gedrückt werden. G-202 Internet 5 Der AP und der G-202 stellen untereinander eine sichere Verbindung her. Das kann bis zu zwei Minuten dauern. 6 Sobald dieser Vorgang erfolgreich abgeschlossen ist, können Sie über Ihren G-202 eine drahtlose Verbindung zum Internet herstellen.
Page 23
Sie das Fenster auf, in dem Sie die WPS- Einstellungen konfigurieren und die PIN des G-202 eingeben können (die Abbildung zeigt als Beispiel ein Fenster des NWA570N von ZyXEL). 3 Klicken Sie im Fenster Adapter des G-202 auf Start und innerhalb der folgenden zwei Minuten im WPS-Fenster...
Page 24
Siteabfragefunktion). Wenn die Drahtlossicherheit für dieses Netzwerk aktiviert ist, müssen die Sicherheitseinstellungen des G-202 konfiguriert werden (siehe Benutzerhandbuch). Hinweis fur Windows XP-Benutzer: Wenn Sie die WZC verwenden mochten, müssen Sie entweder das ZyXEL- Utility-Programm deaktivieren (wenn es bereits installiert wurde) oder nur den Treiber installieren.
Page 25
DEUTSCH • Um das ZyXEL-Utility zu deaktivieren, klicken Sie mit der rechten Maustaste auf das Symbol und wahlen Sie Exit (Beenden). Wenn Sie das ZyXEL-Utility wieder aktivieren möchten, klicken Sie im Arbeitsplatz doppelt auf das Symbol oder klicken Sie auf Start, (Alle) Programme, ZyXEL G- 202 Wireless Adapter Utility, ZyXEL G-202 Wireless Adapter Utility.
ESPAÑOL ESPANOL Acerca de su G-202 El ZyXEL G-202 es un adaptador USB de red inalámbrico para su ordenador. Requisitos de instalación Antes de la instalación, asegúrese de que tiene un equipo en el que se cumplen los siguientes requisitos: •...
1 Instalación Los procedimientos de instalación son similares para todas las versiones admitidas de Windows. Instale la utilidad ZyXEL antes de insertar el G- 202. 1 Inserte el CD incluido en la unidad de CD-ROM de su ordenador. Cuando aparezca la siguiente pantalla, haga clic en Setup (Configuración).
Page 28
3 Aparecerá la siguiente pantalla. Haga clic en Next (Siguiente). 4 Seleccione Driver (Controlador) y Utility (Utilidad) para instalar la utilidad y el controlador del ZyXEL en su ordenador. Si desea instalar el controlador solamente y utiliza Wireless Zero Configuration (WZC) con Windows XP, seleccione Driver (Controlador) solamente.
Page 29
ESPAÑOL predeterminada o haga clic en Browse (Examinar) para seleccionar una carpeta alternativa. 5 Haga clic en Finish (Terminar) para reiniciar el equipo. 6 Localice una ranura USB disponible en el equipo. 7 Quite la tapa protectora para descubrir el conector USB.
Page 30
ESPAÑOL Tras instalar la Utilidad ZyXEL e insertar el G-202, aparece un icono en el área de notificación del sistema (normalmente en la parte inferior del escritorio). Si el color del icono es verde y/o ve el siguiente icono en su escritorio, ya está...
Page 31
2 Aparecerá la pantalla Link Info (Informació n de la conexión) de la utilidad ZyXEL. Si el icono no aparece, desinstale y vuelva a instalar la utilidad ZyXEL. Consulte la Guía del usuario para saber cómo desinstalar la utilidad.
Page 32
ESPAÑOL El G-202 buscará automáticamente una red o redes disponible(s) y se conectará a una red inalámbrica que no tenga la seguridad habilitada. Sin embargo, esta red inalámbrica puede no estar conectada a Internet. Si el color del icono es rojo, no está conectado a una red inalámbrica.
Page 33
3 Haga clic en Start (Inicio). 4 Presione el botón WPS en su PA inalámbrico (el NWA570N del ZyXEL aparece como ejemplo). No importa el botón que presione antes. Debe presionar el segundo botón en dos minutos tras presionar el primero.
Page 34
ESPAÑOL 5 El PA y el G-202 establecen una conexión segura. Esto puede tardar hasta dos minutos. 6 Ahora ya puede conectarse a Internet sin cables a través de su G-202. ¡Enhorabuena - ha terminado! 2.3 Configuración WPS PIN Esta sección le muestra cómo utilizar el método WPS PIN para conectarse a un PA.
Page 35
WPS y escriba el PIN del G-202 (se muestra una pantalla de ejemplo del ZyXEL NWA570N). 3 Haga clic en Start (Inicio) en la pantalla G-202 Adapter (Adaptador) y en Apply (Aplicar) o Start (Inicio) en la pantalla WPS del PA antes de dos minutos.
Page 36
Nota para usuarios de Windows XP: Si desea utilizar WZC, deshabilite la utilidad ZyXEL (si la tiene instalada) o simplemente instale sólo el controlador. • Para desactivar la utilidad ZyXEL, haga clic con el botón derecho en el icono y seleccione Exit (Salir). Para activar...
FRANÇAIS FRANCAIS A propos de votre ZyXEL G-202 Le ZyXEL G-202 est un adaptateur reseau USB sans fil pour votre ordinateur. Configuration requise Avant l'installation, assurez-vous que vous avez un ordinateur avec la configuration suivante: • Pentium II 300MHz ou plus •...
1 Installation Les procedures d'installation sont similaires pour toutes les versions de Windows prises en charge. Installez l'utilitaire ZyXEL avant d'inserer la G- 202. 1 Insérez le CD inclus dans le lecteur CD-ROM de votre ordinateur. Quand l'écran suivant apparaît, cliquez sur Setup.
Page 40
3 L'écran suivant s'affiche. Cliquez sur Suivant. 4 Sélectionner Driver (Pilote) et Utility (Utilitaire) pour installer à la fois l'utilitaire et le pilote de ZyXEL sur votre ordinateur. Si vous voulez installer uniquement le pilote et utiliser Wireless Zero Configuration (Configuration zéro sans fil) (WZC) avec Windows XP, sélectionnez seulement Driver...
Page 41
FRANÇAIS l'emplacement des fichiers par défaut, sinon cliquez sur Browse (Parcourir) pour sélectionner un autre dossier. 5 Cliquez sur Finish (Terminer) pour redémarrer votre ordinateur. 6 Recherchez un emplacement USB disponible sur l'ordinateur. 7 Retirez le cache de protection pour laissez apparaître le connecteur USB.
Page 42
FRANÇAIS Après que vous avez installé l'utilitaire ZyXEL et inséré la G-202, une icône s'affiche dans la barre systême (normalement à la base de l'écran). Si la couleur de l'icône est verte et/ou vous voyez l'icône suivante sur votre écran, vous êtes déjà connecté à un réseau sans fil.
Page 43
G-202, une icône apparaît dans la barre d'état. Double cliquez sur l'icône 2 L'écran Info liaison de l'utilitaire ZyXEL apparaît.. Si l'icône ne s'affiche pas, désinstallez et réinstallez l'utilitaire ZyXEL. Consultez le guide de l'utilisateur pour désinstaller l'utilitaire.
Page 44
FRANÇAIS Le G-202 recherche automatiquement les réseaux disponibles et se connecte à un réseau sans fil non sécurisé. Cependant, ce réseau sans fil n'est peut-être pas connecté à Internet. Si la couleur de l'icône est rouge, vous n'êtes pas connecté à un réseau sans fil. Si la couleur de l'icône est verte, vous êtes déjà...
Page 45
3 Cliquez sur Start (Démarrer). 4 Appuyez sur le bouton WPS sur votre AP sans fil (NWA570N de ZyXEL est indiqué comme exemple). L'ordre de pression des boutons n'a pas d'importance. Vous devez appuyer sur le second bouton dans les deux minutes qui suivent l'appui sur le premier.
Page 46
FRANÇAIS 5 L'AP et le G-202 établissent une connexion sécurisée. Cela peut prendre jusqu'à deux minutes. 6 Vous êtes maintenant prêt à vous connecter à Internet sans fil à l'aide de votre G-202. Félicitations - vous avez terminé! 2.3 Configuration du code PIN WPS Cette section montre comment utiliser la méthode PIN WPS pour vous connecter à...
Page 47
2 Lancez l'utilitaire de configuration de votre AP, allez à l'écran où vous pouvez configurer les paramètres WPS et entrez le PIN du G-202 (un écran d'exemple du NWA570N du ZyXEL est présenté). 3 Cliquez sur Start (Démarrer) dans l'écran Adapter (Adaptateur) G-202 et Apply (Appliquer) ou Start (Démarrer) dans l'écran WPS de l'AP en l'espace de deux...
Page 48
Remarques pour les utilisateurs de Windows XP: Si vous voulez utiliser WZC, vous pouvez soit désactiver l'utilitaire ZyXEL (si vous l'avez déjà installé) soit simplement installer le pilote. Pour desactiver l'utilitaire ZyXEL, cliquez avec le bouton droit de la souris sur l'icone et sélectionnez Exit (Quitter).
Page 49
Certification(s) du Produit 1 Connectez vous sur www.zyxel.com. 2 Sélectionnez votre produit dans la liste déroulante se trouvant sur la page d'accueil ZyXEL pour accéder à la page du produit concerné. 3 Sélectionnez sur cette page la certification que...
ITALIANO ITALIANO La vostra ZyXEL G-202 ZyXEL G-202 e un adattatore di rete wireless USB per i computer. Requisiti per l'installazione Prima dell'installazione verificare che il computer sia dotato di qaunto segue: • Pentium II a 300 MHz o superiore •...
Page 51
1 Installazione Le procedure di installazione sono simili per tutte le versioni di Windows supportate. Installare ZyXEL Utility prima di inserire la G- 202. 1 Inserire il CD fornito a corredo nell'unità CD-ROM del computer. Alla visualizzazione della schermata seguente, fare clic su Setup (installazione).
Page 52
2 Selezionare la lingua e fare clic su OK. 3 Viene visualizzata la seguente schermata. Premere Avanti. 4 Selezionare Driver e Utility per installare sia l'utility ZyXEL sia il driver sul computer. Se si desidera installare solo il driver e utilizzare Wireless Zero Configuration (WZC) di Windows XP, selezionare solo Driver.
Page 53
è correttamente inserita. Mai piegare, forzare o torcere la G-202 nello slot Dopo l'installazione dell'Utility ZyXEL e l'inserimento della G- 202, nell'area messaggi viene visualizzata un'icona (di solito nella parte bassa del desktop). Se il colore dell'icona è...
Page 54
Identification Number) dell'G-202 nella schermata di config- urazione di un Access Point (AP). Vedere la sezione 2.3. 2.1 Aprire l'utilità 1 In seguito all'installazione dell'utility ZyXEL e all'inserimento di G- 202, nella barra di sistema viene visualizzata un'icona. Fare doppio clic...
Page 55
ZyXEL. Se l'icona non viene visualizzata, disinstallare e reinstallare l'utility di ZyXEL. Fare riferimento alla Guida utente per le istruzioni su come disinstallare l'utility. L'G-202 cerca automaticamente qualsiasi rete disponibile e si collega a una rete wireless se per questa non è attiva l'opzione di protezione.
Page 56
(Wi-Fi Protected Setup) e PBC (Push Button Configuration). 3 Fare clic su Start. 4 Premere il pulsante WPS sull'AP wireless (è mostrato l'NWA570N di ZyXEL a titolo di esempio). Non importa quale dei pulsanti viene premuto prima, occorre solo fare...
Page 57
ITALIANO attenzione a premere il secondo pulsante entro due minuti dalla pressione del primo. G-202 Internet 5 L'AP e l'G-202 stabilisce una connessione sicura. L'operazione può richiedere fino a due minuti. 6 Siete pronti per collegarvi a Internet wireless tramite l'G- 202.
Page 58
3 Avviare l'utilità di configurazione dell'AP, aprire la schermata in cui è possibile configurare le impostazioni WPS e immettere il PIN dell'G-202 (è raffigurata una schermata di esempio dell'NWA570N di ZyXEL). 4 Scegliere Start nella schermata G-202 Adapter (adattatore) e quindi Apply oppure Start nella schermata WPS dell'AP entro due minuti.
Nota per gli utenti di Windows XP: Se si desidera utilizzare la funzionalità WZC, disabilitare ZyXEL Utility (se già installato) oppure installare unicamente il driver. • Per disabiltiare l'utility ZyXEL, fare clic con il pulsante destro del mouse sull'icona e selezionare Esci. Per attivare nuo-...
Page 60
ITALIANO Procedura per visualizzare le certificazioni di un prodotto 1 Andare alla pagina www.zyxel.com 2 Nel sito ZyXEL, selezionare il proprio prodotto dall’elenco a discesa per andare alla pagina di quel prodotto. 3 Da questa pagina selezionare la certificazione che...
РУССКИЙ О Вашем адаптере ZyXEL G-202 ZyXEL G-202 - это беспроводной сетевой USB адаптер для вашего компьютера. Требования по установке Перед установкой убедитесь, что Ваш компьютер соответствует следующим требованиям: • Pentium II 300 МГц или выше • Не менее 20 Мб доступного места на жестком диске...
Page 63
Client, то его следует деинсталлировать (удалить). 1 Установка Процедуры установки схожи для всех поддерживаемых версий Windows. Установите ZyXEL перед подключением G- 202. 1 Вставьте CD-диск с ПО в привод CD-ROM вашего компьютера. Когда отобразится следующее окно, щелкните на кнопке Setup (Установить). Если такое...
Page 64
2 Выберите язык и щелкните OK. 3 Отобразится следующее окно. Щелкните Next (Далее). 4 Выберите Driver and Utility (Драйвер и утилита), чтобы установить утилиту и драйвер ZyXEL на ваш компьютер. Если вы хотите установить только драйвер и использовать нулевую беспроводную конфигурацию...
Page 65
РУССКИЙ хотите использовать каталог по умолчанию, или Browse (Обзор), если Вы хотите выбрать другой каталог. 5 Щелкните Finish (Завершить) для перезагрузки компьютера. 6 Снимите защитную крышку, чтобы открыть USB-разъем. Вставьте адаптер G-202 в свободный USB-порт компьютера. Если G-202 установлен правильно, то загорятся...
Page 66
РУССКИЙ После инсталляции утилиты ZyXEL и установки G-202 в слот на системной панели появится значок (обычно внизу рабочего стола). Если цвет значка - зеленый и/или вы видите на своем рабочем столе такой значок, то вы уже подключены к беспроводной сети.
Page 67
РУССКИЙ 2.1 Откройте утилиту установки 1 После утилиты ZyXEL и G- 202 на панели задач Windows (обычно в нижней части рабочего поля) появляется иконка. Дважды щелкните на ней 2 Появится окно Link Info (Информац ия о связи) утилиты ZyXEL.
Page 68
РУССКИЙ Если значок не отображается, то деинсталлируйте, а затем заново установите утилиту ZyXEL. Смотрите Руководство пользователя, где описана процедура деинсталляции утилиты. Адаптер G-202 автоматически проводит поиск любой доступной сети(ей) и подсоединяется к беспроводной сети без включения системы защиты. Тем не менее, эта...
Page 69
Protected Setup) (Защищенная установка (Wi-Fi) и PBC (Push Button Configuration) (Конфигурация, созданная нажатием кнопки). 3 Нажмите Start (Старт). 4 Нажмите на кнопку WPS на вашей беспроводной АР (на примере показано устройство ZyXEL NWA570N). Не имеет значения, какую из кнопок нажимать первой.
Page 70
РУССКИЙ Вы должны нажать вторую кнопку в течение двух минут после нажатия первой. G-202 Internet 5 AP и G-202 устанавливают безопасное соединение. Это может занять пару минут. 6 Теперь вы можете подключаться к Интернету по беспроводной сети через G-202. Наши поздравления - установка завершена! 2.3 Конфигурация...
Page 71
2 Запустите утилиту настройки конфигурации АР, перейдите к окну настройки параметров WPS и введите ПИН G-202 (на примере показано окно утилиты устройства ZyXEL NWA570N). 3 Щелкните на кнопке Start (Старт) в окне G-202 Adapter (Адаптер) и нажмите на кнопке Apply (Применить) или...
Page 72
безопасности, то вы должны установить соответствующие настройки на G-202 (см. Руководство пользователя). Примечания для пользователей Windows XP: Если вы хотите использовать WZC, то или отключите утилиту ZyXEL (если она уже у вас установлена), или просто установите драйвер. • Чтобы отключить утилиту ZyXEL щелкните правой...
Page 73
(Только драйвер). Процедура просмотра сертификатов изделий 1 Зайдите на сайт www.zyxel.ru. 2 Выберите нужное изделие из раскрывающегося списка на домашней странице корпорации ZyXEL и перейдите на страницу, посвященную этому изделию. 3 Выберите на этой странице нужный сертификат для просмотра.
SVENSKA SVENSKA Om ZyXEL G-202 ZyXEL G-202 ar en trådlös nätverksadapter för din dator. Installationskrav Före installation, kontrollera att din dator har följande: • Pentium II 300MHz CPU eller högre • Minst 20 MB ledigt hårddiskutrymme • Minst 32 MB RAM •...
Page 75
SVENSKA 1 Installation Installationsprocedurerna ar likartade for alla Windows- versioner som stods. Installera ZyXEL-verktyget innan du ansluter G- 202. 1 Sätt i den medföljande CD-skivan i CD-ROM-enheten i datorn. När följande skärm visas, klicka på Setup (inställningar). Om skärmen inte visas, leta reda på och dubbelklicka på...
Page 76
3 Följande skärm visas. Klicka på Next (nästa). 4 Välj Driver (drivrutin) och Utility (verktyg) för att installera både ZyXEL-verktyget och drivrutinen i din dator. Om du enbart vill installera drivrutinen och använda WCZ (Wireless Zero Configuration) med Windows XP, välj enbart Driver.
Page 77
Du far aldrig boja, tvinga eller vrida in G-202 i porten. Nar du har installera ZyXEL-verktyget och satt i G-202, visas en ikon i aktivitetsfaltet (finns vanligtvis langst ner till höger på skrivbordet). ikonen är grön är du redan ansluten till ett trådlöst nätverk.
Page 78
G-202s PIN (Personal Identification Number) på konfigurationsskärmen för en AP (Access Point). Se avsnitt 2.3. 2.1 Öppna verktyget 1 När du har installerat ZyXEL-verktyget och satt i G-202, visas en ikon i aktivitetsfältet. Dubbelklicka på ikonen 2 ZyXEL- verktygets skärm Link...
Page 79
SVENSKA Om ikonen inte visas, avinstallera och ominstallera ZyXEL-verktyget. Se bruksanvisningen angående hur du avinstallerar verktyget. G-202 söker automatiskt efter eventuella tillgängliga nätverk och ansluter till ett trådlöst nätverk utan säkerhetsfunktionen aktiverad. Men detta trådlösa nätverk är eventuellt inte anslutet till Internet.
Page 80
(WiFi-skyddad installation) och PBC (Push Button Configuration) (tryckknappskonfiguration). 3 Klicka på Start. 4 Tryck på WPS-knappen på din trådlösa AP (ZyXEL:s NWA570N visas som ett exempel). Det spelar ingen roll vilken knapp du trycker på först. Du måste trycka på den...
Page 81
SVENSKA andra knappen inom två minuter efter det att du tryckt på den första. G-202 Internet 5 AP och G-202 upprättar en säker anslutning. Detta kan ta upp till två minuter. 6 Nu kan du ansluta trådlöst till Internet via G-202. Grattis –...
Page 82
SVENSKA avmarkerade textfältet. Du måste ange denna PIN på WPS-skärmen för AP. 2 Starta din APs konfigurationsverktyg, gå till skärmbilden där du kan konfigurera WPS-inställningar och ange G- 202s PIN (en exempelskärm från ZyXELs NWA570N visas). 3 Klicka på Start på skärmbilden G-202 Adapter och Apply (verkställ) eller Start på...
Page 83
G-202 (se bruksanvisningen). Kommentar till Windows XP-användare: Om du vill använda WZC, ska du antingen inaktivera ZyXEL-verktyget (om du redan har installerat det) eller helt enkelt installera drivrutinen. • Du inaktiverar ZyXEL-verktyget genom att högerklicka på...
Page 84
Se bruksanvisningen för allmänna FCC-deklarationer. Procedur för att visa en produkts certifikat 1 Gå till www.zyxel.com 2 Välj din produkt från rullgardinslistrutan på ZyXEL:s hemsida för att gå till denna produkts sida. 3 Välj det certifikat du vill titta på från denna sida.
• Windows 98 Second Edition, Windows ME, Windows 2000, Windows XP 或 Windows Vista 中任一作業系統 • Windows 98 SE 的使用者可能需要 Windows 98 SE 光碟 Windows Vista 使用者請注意 : ZyXEL 公用程式有部分功能無 法在 Windows Vista 系統下使用。詳細資訊請參閱 《使用手 冊》 。 如果您的電腦先前安裝過 Funk Odyssey Client...