Vpn Quick Start - D-Link NetDefendOS User Manual

Network security firewall
Hide thumbs Also See for NetDefendOS:
Table of Contents

Advertisement

9.2. VPN Quick Start

Overview
Later sections in this chapter will explore VPN components in detail. To help put those later
sections in context, this section is a quick start summary of the steps needed for VPN setup.
It outlines the individual steps in setting up VPNs for the most common scenarios. These are:
IPsec LAN-to-LAN with Pre-shared Keys
IPsec LAN-to-LAN with Certificates
IPsec Roaming Clients with Pre-shared Keys
IPsec Roaming Clients with Certificates
L2TP/Ipsec Roaming Clients with Pre-Shared Keys
L2TP/IPsec Roaming Clients with Certificates
PPTP Roaming Clients
Common Tunnel Setup Requirements
Before looking at each of these scenarios separately, it is useful to summarize the common
NetDefendOS requirements when setting up any VPN tunnel, regardless of the type.
Define the Tunnel
Firstly we must define the tunnel itself. NetDefendOS has various tunnel object types which
are used to do this, such as an IPsec Tunnel object.
A Route Must Exist
Before any traffic can flow into the tunnel, a route must be defined in a NetDefendOS routing
table. This route tells NetDefendOS which network can be found at the other end of the
tunnel so it knows which traffic to send into the tunnel.
In most cases, this route is created automatically when the tunnel is defined and this can be
checked by examining the routing tables.
If a route is defined manually, the tunnel is treated exactly like a physical interface in the
route properties, as it is in other aspects of NetDefendOS. In other words, the route is saying
to NetDefendOS that a certain network is found at the other end of the tunnel.
Define an IP Rule to Allow VPN Traffic
An IP rule must be defined that explicitly allows traffic to flow between a network and the
tunnel. As with route definitions, the tunnel is treated exactly like a physical interface when
defining the IP rule.
IP rules are not created automatically after defining the tunnel object and if they do not exist
then no traffic can flow through the tunnel and will instead, be dropped.
The following sections will look at the detailed setup for each of the VPN scenarios listed earlier.
671
Chapter 9: VPN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents