Remotemgmtsettings - D-Link NetDefend DFL-210 Cli Reference Manual

Network security firewall ver. 1.03
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

3.51.16. RemoteMgmtSettings

IGMPQueryInterval
IGMPQueryResponseInterval
IGMPStartupQueryInterval
IGMPStartupQueryCount
IGMPLastMemberQueryInter-
val
IGMPUnsolicatedReportInterval
IGMPRouterVersion
IGMPLowestCompatibleVersion
3.51.16. RemoteMgmtSettings
Description
Setup and configure methods and permissions for remote management of this system.
Properties
NetconBiDirTimeout
WebUIBeforeRules
WWWSrv_HTTPPort
WWWSrv_HTTPSPort
SSHBeforeRules
HTTPSCertificate
SNMPBeforeRules
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
The interval (ms) between general queries sent by the Secur-
ity Gateway. (Default: 125000)
The maximum time (ms) until a host/client has to send an an-
swer to a query. (Default: 10000)
The general query interval (ms) to use during the startup
phase (default: 1/4 of the 'IGMP Query Interval' parameter.
(Default: 30000)
The number of startup queries to send during the startup
phase. (Default: 2)
The maximum time (ms) until a host/client has to send an an-
swer to a group and group-and-source specific query.
(Default: 5000)
The time between repetitions (ms) of an initial membership
report. (Default: 1000)
Multiple IGMP querying routers on a network must use the
same IGMP version. (Default: IGMPv3)
Lowest IGMP compatibility mode. (Default: IGMPv1)
Specifies the amount of seconds to wait for the administrator
to log in before reverting to the previous configuration.
(Default: 30)
Enable HTTP(S) traffic to the security gateway regardless of
configured IP Rules. (Default: Yes)
Specifies the HTTP port for the web user interface. (Default:
80)
Specifies the HTTP(S) port for the web user interface.
(Default: 443)
Enable SSH traffic to the security gateway regardless of con-
figured IP Rules. (Default: Yes)
Specifies which certificate to use for HTTPS traffic. Only
RSA certificates are supported. (Optional)
Enable SNMP traffic to the security gateway regardless of
176
Chapter 3. Configuration Reference

Advertisement

Table of Contents
loading

Table of Contents