Board Information - Foxconn BLACKOPS User Manual

multiple boot devices user from pressing �Esc�� key to enter boot menu.
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On Self Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
System Status
Normal
No Memory
No Display
Post Error Message
No CPU Fan
► Hardware Jumper Selected
When BIOS_SELECT jumper, which is on the motherboard, is set to 1-2 or 3-4, this item will
auto detect power-on boot BIOS.
► Software Item Selecting
When BIOS_SELECT jumper, which is on the motherboard, is set to 5-6 or 7-8, you can select
the power-on boot BIOS by this item. Its default is BIOS ROM 1.

Board Information

Model Name
BIOS ID
BIOS Version
BIOS Build Date
OnBoard LAN 1 MAC Address
OnBoard LAN 2 MAC Address
↑↓��������:Move Enter:Select
F5:Previous Values
► Model Name
This item shows the model name.
► BIOS ID/Version
This item shows the BIOS ID/version.
► BIOS Build Date
This item shows the BIOS building date.
► OnBoard LAN 1/2 MAC Address
This item shows the onboard LAN 1/2 MAC address.
Power LED Status
Always On
Continue blinking On (1sec.), Off (1sec.)
Continue blinking On (2sec.), Off (2sec.)
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Continue blinking On (1/2sec.), Off (1/2sec.)
Phoenix - AwardBIOS CMOS Setup Utility
Board Information
BlackOps
X48A01.F1.D.08.BlackOps
D08
03/05/2008
00 01 6C 00 00 01
00 01 6C 00 00 02
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
51
Stop Blinking Condition
Always On
Reboot & Memory OK
Reboot & Display OK
Enter Setup or Skip
Reboot & Fan OK
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults