Foxconn BLACKOPS User Manual page 115

2. Copy section 5-2, BIOS Configuration.
Shut down the computer, connect SATA hard disks to SATA ports, power on
computer again.
Press <Del> key, get into BIOS, set SATA mode to �RAID��, press <F10> to save and
exit BIOS. PC will reboot.
SATA Mode
x LEGACY Mode Support
x Turbo Memory Support
OnBoard IDE/SATA Chip
↑↓��������:Move Enter:Select
F5:Previous Values
3. Copy section 5-3, Create RAID in BIOS.
Press <CTRL><I> simultaneously to get into RAID BIOS set up (Intel
Storage Manager option ROM utility).
Configure your new hard disks to RAID0, 1, 5 or 10. Exit RAID BIOS. PC will reboot.
4. The Windows XP is running again and a new hardware of RAID disk was found.
Click �Cancel�� to skip this Wi�ard.
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
RAID
IDE
Disabled
Disabled
IDE Mode
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
108
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults
®
Matrix
Click to exit.