System Information - Foxconn H55MX-S Series User Manual

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, memory and
so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change the
setting.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
System Time
System Date
► Primary IDE Master
► Primary IDE Slave
► Secondary IDE Master
► Secondary IDE Slave
► Third IDE Master
► Fourth IDE Master
Floppy A
Halt On
Keyboard
Mouse
Floppy
Model Name
BIOS Version
Memory
MAC Address
↑↓←→:Move Enter:Select
► System Time
This item allows you to configure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to
select a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Primary / Secondary IDE Master / Slave, Third / Fourth IDE Master
While entering setup, BIOS automatically detects the presence of IDE devices. This item
displays the drive information of IDE devices.
► Floppy A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [Disabled], [360KB, 5
"].
1
MB, 3 /
2
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-
► Keyboard
System Information
[15 : 40 : 49]
09
[Mon , 10/26/2009]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[1.44 MB 3
[All Errors, But ...]
[Enabled]
[Disabled]
[Disabled]
: H55MX-S
: 996F1D03
: 1024MB
: 00-01-6C-69-0B-DB
+/-/:Value
F9:Optimized Defaults
"], [1.2MB, 5
1
4
/
tion can be enabled/disabled in the next three settings.
Help Item
Use [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
change system date
]
1 /
2
F10:Save ESC:Exit
"], [720KB, 3 "], [1.44MB, 3
1 1
4
/ /
2
23
F1:General Help
"] and [2.88
1
/
2