Foxconn BLACKOPS User Manual page 28

3. Install the Chipset Fan
First place the chipset fan above heatsink cooler, its attach 3-wire connector to the
NB fan header on the motherboard, then use the screws to fasten it.
4. Quantum Flow-GPU Blower
The 120mm fan provides good cooling for the graphics card, especially in multi-GPU setups.
5. PCB Tray
If you choose not to use the chassis, you can configure the motherboard in an open environment
as depicted.
Note: The PCB tray(in the package) is under the motherboard.
21