Power On Function - Foxconn BLACKOPS User Manual

Power On function

Wake-Up by PCI/PME
USB KB Wake-Up from S3 USB KB Wake-Up from S3
Power On by Mouse Power On by Mouse
Power On by Keyboard
↑↓��������:Move Enter:Select ��������:Move Enter:Select
F5:Previous Values
► Wake-Up by PCI/PME
This item is used to set the system to wake up by PCI card.
► USB KB Wake-Up from S3
This item is used to set the system to wake up by USB equipment when it is in S3(Suspend to
RAM) mode.
► Power On by Mouse
When enabled, it allows you to use the PS/2 mouse to wake up the system from soft off and
green mode. This feature requires an ATX power supply.
► Power On by Keyboard
This item allows you to use the PS/2 keyboard to wake up the system from soft off and green
mode. This feature requires an ATX power supply. The setting values: �Disabled��; �Ctrl+ESC��;
�Ctrl+F1��; �Ctrl+Space��; �Any Key��.
Phoenix - AwardBIOS CMOS Setup Utility
Power On Function
:Move Enter:Select +/-/PU/PD:Value F10:Save +/-/PU/PD:Value F10:Save +/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Disabled Disabled
Disabled
Disabled Menu Level ►
Disabled
ESC:Exit F1:General Help ESC:Exit F1:General Help ESC:Exit F1:General Help
F7:Optimized Defaults
40
Item Help