Foxconn BLACKOPS User Manual page 30

BIOS Select Jumper: BIOS_SeLeCT
The jumper is used to select the booting from
BIOS ROM 1 or BIOS ROM 2. You can refer to
the following table for the setting.
Definition
1-2 Set Pin 1 and Pin 2 closed
3-4 Set Pin 3 and Pin 4 closed
5-6
Set Pin 5 and Pin 6 closed
(default)
7-8 Set Pin 7 and Pin 8 closed
fSB Select Jumper: fSBSeL
The jumper is used to select the FSB clock, the setting values are: Auto,
266MHz, 333MHz, 400MHz, 450MHz. See the table as below.
Definition
1-2(default) Set Pin 1 and Pin 2 closed
3-4 Set Pin 3 and Pin 4 closed
5-6 Set Pin 5 and Pin 6 closed
7-8 Set Pin 7 and Pin 8 closed
9-10 Set Pin 9 and Pin 10 closed
Note : When you set the jumper to pins 1-2, FSB clock can be set by BIOS setup. But if you select
other settings, FSB clock will work at corresponding value.
1 2
7 8
BIOS_SELECT
Description
Description
BIOS ROM 2
Function
Force BIOS ROM 1
Force BIOS ROM 2
BIOS select, default is
BIOS ROM 1
BIOS select, default is
BIOS ROM 2
Function
Auto
266MH�
333MH�
400MHz
450MHz
23
BIOS ROM 1
1 2
9 10
FSBSEL