Integrated Peripherals - Foxconn BLACKOPS User Manual

Integrated Peripherals

► OnChip IDE Device
► OnBoard Device Control
► USB Device Setting
OnBoard FDC Controller
OnBoard Serial Port
OnBoard IrDA Port
IrDA Duplex Mode
↑↓��������:Move Enter:Select ��������:Move Enter:Select
F5:Previous Values
► OnChip IDE Device / OnBoard Device Control / USB Device Setting
Press <Enter> to go to relative submenu, please refer to the next sections.
► OnBoard FDC Controller
This item is used to enable or disable the onboard FDC controller.
► OnBoard Serial Port
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port.
► OnBoard IrDA Port
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard infrared
device.
► IrDA Duplex Mode
This item allows you to select the infrared mode of the onboard infrared device.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
:Move Enter:Select +/-/PU/PD:Value F10:Save +/-/PU/PD:Value F10:Save +/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Press Enter
Press Enter
Press Enter
Press Enter Menu Level ►
Enabled
3F8/IRQ4
2F8/IRQ3
Half
ESC:Exit F1:General Help ESC:Exit F1:General Help ESC:Exit F1:General Help
F7:Optimized Defaults
34
Item Help
infrared