Bios Configuration; Create Raid In Bios - Foxconn BLACKOPS User Manual

5-2 BIOS Configuration

1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self Test).
2. Select the "Integrated Peripherals" from the "Main menu", then select the
IDE Device" item and press <Enter> to go to the configuration items.
3. Select and Set the "SATA Mode" option to �RAID��.
4. Press <F10> to save the setting then PC will reboot itself.
SATA Mode
LEGACY Mode Support
x Robson Support
OnBoard IDE/SATA Chip
↑↓��������:Move Enter:Select
F5:Previous Values

5-3 Create RAID in BIOS

enter RAID BIOS Setup
When BIOS is restarted, it will display a message asking you to press <Ctrl>+<I> keys
simultaneously to enter the main menu of Intel
Utility. Press the <Ctrl>+<I> to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v7.6.0.1006 ICH9R wRAID5 Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
None Defined.
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
RAID
Disabled
Disabled
IDE Mode
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
�
� DISC/VOLUME INFORMATION
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select [ESC]-Exit
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults
Matrix Storage Manager Option ROM
®
Main Menu ��
3. Reset Disks to Non-RAID
4. Exit
��
Si�e Type/Status(Vol ID)
Non-RAID Disk
232.9GB Non-RAID Disk
298.1GB Non-RAID Disk
279.5GB Non-RAID Disk
[Enter]-Select Menu
79
"OnChip
Item Help