Foxconn BLACKOPS User Manual page 119

4. Connect an auxiliary power source from the power supply to the graphics card.
5. Connect the DMS-59 cable to the DVI monitor connector and two graphics cards
that you install as shown.
Connect to monitor
6. Power on your computer and get into OS (Windows
Windows XP Professional 64-bit Edition).
®
7. Install Microsoft's .NET Framework Version 1.1. Without it, The ATI Catalyst
Control Center can not launch properly.
8. Install the ATI graphics card drivers and restart your computer. Then you will find
"ATI Catalyst Control Center" on your desktop.
XP 32-bit with SP2 or
®
112
Power
Extension
Cable
Connect to master
graphics card DMS
connector
Connect to slave
graphics card DVI
connector
TM