Foxconn BLACKOPS User Manual page 97

6. It will skip "Strip Size" menu for RAID1.
Intel(R) Matrix Storage Manager option ROM v7.6.0.1006 ICH9R wRAID5 Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
7. In "Capacity" item, use the default value, and press <Enter>. The si�e of the smaller
hard disk 232.9GB is becoming the default value, and it indicates the maximum
capacity.
8. Select "Create Volume" and press <Enter>. A warning message will appear :
Press <Y> to create the volume and return to the main menu.
Intel(R) Matrix Storage Manager option ROM v7.6.0.1006 ICH9R wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID1
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
� CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Si�e:
Capacity:
The default value indicates the maximum capacity using the selected
disks. Entering a lower capacity allows you to create a second
volume on these disks
[↑↓]-Change [TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
� DISC/VOLUME INFORMATION
Level
RAID1(Mirror)
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select [ESC]-Exit
��
TryRAID0
RAID0(Stripe)
Select Disks
N/A
232.9 465.8 GB
Create Volume
� HELP ��
[ESC]-Previous Menu [Enter]-Select
� Main Menu ��
3. Reset Disks to Non-RAID
4. Exit
��
Stripe Si�e Status
N/A 232.9GB Normal
Si�e Type/Status(Vol ID)
Non-RAID Disk
232.9GB Member Disk(0)
298.1GB Member Disk(0)
279.5GB Non-RAID Disk
[Enter]-Select Menu
90
Bootable
Yes