Foxconn BLACKOPS User Manual page 57

► CPU GTL Ref. 0/Ref. 1/Ref. 2/Ref. 3 Voltage
This item is used to adjust CPU GTL reference voltage.
► NB Voltage Setting / NB GTL Ref. Voltage
This item is used to set NB/ NB GTL reference voltage.
► SB Voltage Setting
This item is used to set SB Voltage. The default voltage is 1.500V.
********Affect Memory MHz********
► DRAM Voltage Setting
This item is used to set DRAM voltage. The default voltage is 1.648V.
► DRAM Pull-Up/Pull-Down/Ref. Voltage
These items are used to set DRAM pull-up/pull-down/controller reference voltage.
OC Gear
*************** OC Gear ***************
Current Storage Gear
Store My Setting
Restore My Setting
Clear My Setting
********** Foxconn Function **********
Smart Boot Menu
Smart Power LED
Hardware Jumper Selected
Software Item Selecting
↑↓��������:Move Enter:Select
F5:Previous Values
*************OC Gear**************
► Current Storage Gear
We have more spaces in CMOS to allow you to store up to 4 sets of BIOS configuration data.
You can change any setting of BIOS, including the overclocking information, and save the
whole BIOS settings to one of four storage area. Later, you can retrieve BIOS settings by
restore it. This item is used to choose storage section to store your BIOS settings. Setting
values: [Not Use It]; [Storage Gear 1]; [Storage Gear 2]; [Storage Gear 3]; [Storage Gear 4].
► Store/Restore/Clear My Setting
This item allows you to Store/Restore/Clear the BIOS settings. See the help string in "Item
Help" table for detail.
********Foxconn Function********
► Smart Boot Menu
When PC starts, if �Enabled�� is selected, a Boot Menu will be automatically displayed to inform
you to select a boot device. If no device is selected, the first device will be used. If [Disabled] is
selected, then PC will ask you to press [Esc] key to get into Boot Menu. This setting simplifies
NB GTL Ref. Voltage
NB GTL reference voltage.
Phoenix - AwardBIOS CMOS Setup Utility
OC Gear
Not Use It
Not Use It
Store
Restore
Clear
Disabled
Enabled
BIOS ROM 1
BIOS ROM 1
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Item Help
Menu Level ►
Choose storage section
1 or 2 or 3 or 4 to
store your over clock
setting. If you store
your setting to
Current Storage Gear
successfully, then the
Storage Gear will
turn to Green color
If you clear the
Current Storage Gear
successfully, then the
color will turn back
to normal.
ESC:Exit F1:General Help
F7:Optimized Defaults
50