Create Raid Volume - Foxconn BLACKOPS User Manual

Create RAID Volume

Create RAID 0 �1st Volume�
1. Select "1. Create RAID Volume" from the menu and press <Enter>.
The menu appears :
Intel(R) Matrix Storage Manager option ROM v7.6.0.1006 ICH9R wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
2. In "Name" item, you can input a device name for the RAID0 system and press <Enter>
to apply it. Here, we name it as TryRAID0 to replace the default Volume0.
3. In "RAID Level" item, you can use Up or Down arrow key to make a selection from
one of RAID0, 1, 5, 10 items. Select RAID0 (Stripe) and press <Enter>.
Intel(R) Matrix Storage Manager option ROM v7.6.0.1006 ICH9R wRAID5 Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
� CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Si�e:
Capacity:
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]-Change [TAB]-Next
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
� CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Si�e:
Capacity:
Choose the RAID level:
RAID 0: Stripes data (performance).
RAID1: Mirrors data (redundancy).
RAID 10: Mirrors data and stripes the mirror.
RAID 5: Stripes data and parity.
[↑↓]-Change [TAB]-Next
��
Volume0
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
� HELP ��
[ESC]-Previous Menu
��
TryRAID0
RAID0(Stripe)
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
� HELP ��
[ESC]-Previous Menu
80
[Enter]-Select
[Enter]-Select