Advanced Bios Features - Foxconn BLACKOPS User Manual

Advanced BIOS Features

► Hard Disk Boot Priority
CPU L1 & L2 Cache
CPU L3 Cache
Hyper-Threading Technology
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Security Option
APIC Mode
MPS Version Control for OS
OS Select for DRAM > 64MB
Delay For HDD (Secs)
Full Screen Logo Show
Small Logo(EPA) Show
Summary Screen Show
↑↓��������:Move Enter:Select
F5:Previous Values
► Hard Disk Boot Priority
This option is used to select the Priority for HDD startup. After pressing <Enter>, you can
select the HDD using the Up/Down arrow keys, and change the HDD priority using <PageUp>/
<PageDown>; you can exit this menu by pressing <Esc>.
► CPU L1 & L2 Cache
Enable/Disable CPU cache setting. L1, L2 cache are small, fast memory caches that are built
into a CPU and help speed access to important and frequently-used data. L1 cache is typically
smaller and faster than L2 cache. L1 cache is an abbreviation of Level 1 cache.
► CPU L3 Cache
This item will be displayed only if your CPU is supporting this feature. If the CPU do support
L3, you may set this item to enable or disable. Leave this item at the default value for better
performance.
► Hyper-Threading Technology
Hyper-Threading Technology allows one physical processor package to be perceived as two
separate logical processors within the operating system. This option is used to enable or dis-
able the feature. It will be displayed only if your CPU is supporting this feature.
► First/Second/Third Boot Device
These three options allow you to select the priority of boot sequence from different devices.
► Boot Other Device
With this function set to enable, the system will boot from some other devices provided that the
first/second/third boot devices failed.
► Boot Up Floppy Seek
This item controls whether the BIOS will be checking for a floppy drive while booting up. If it
cannot detect one (either due to improper configuration or physical unavailability), it will appear
an error message. Disabling this function, then POST will not detect the floppy.
► Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Press Enter Press Enter
Enabled
Enabled
Enabled
Hard Disk
CD-ROM
USB-ZIP
Enabled
Disabled
On
Fast
Setup
Enabled
1.4
Non-OS2
0
Enabled
Enabled
Disabled
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
31
Item Help
Menu Level ►
Select Hard Disk Boot
Device Priority
ESC:Exit F1:General Help
F7:Optimized Defaults