Foxconn BLACKOPS User Manual page 23

8-pin ATX 12 V Power Connector : PWR2
The 8-pin ATX 12V power supply connects to PWR2 and provides power to the CPU.
!
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
IDe Connector : PIDe
With the provided Ultra DMA133/100/66 IDE ribbon
cable, you can connect to any IDE type of hard
disk and CD/DVD ROM/RW drive. You also can
configure as a disk array through the JMicron RAID
controller.
Floppy Disk Drive Connector : FLOPPY
This motherboard includes a standard floppy disk
drive(FDD) connector, supporting 360KB, 720KB,
1.2MB, 1.44MB, and 2.88MB FDDs.
5 1
Pin #
1
+12V GND
2
3
8 4
4
PWR2
16
Definition Pin # Definition
GND 5 +12V
GND 6 +12V
GND 7 +12V
GND 8 +12V
Connect a 4-pin
power plug