Exit Raid Bios - Foxconn BLACKOPS User Manual

exit RAID BIOS

1. Take TryRAID5 as an example, select "4. exit" in main menu and press <Enter>.
The screen displays :
Intel(R) Matrix Storage Manager option ROM v7.6.0.1006 ICH9R wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID5
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
2. Press <Y> to exit Intel
3. Shut down the computer, remove WD hard disk, and we will continue for Windows
OS installation. If you do not remove irrelevant WD hard disk, Windows may detect
it during the installation, and you could be confused.
4. Remove any diskette from floppy drive.
5. Restart computer to start Windows installation.
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
�
� DISC/VOLUME INFORMATION
� CONFIRM EXIT
Level
RAID5(Parity)
Are you sure you want to exit? (Y/N):
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select [ESC]-Exit
Matrix Storage Manager program. The system will reboot.
®
Main Menu ��
3. Reset Disks to Non-RAID
4. Exit
��
��
Stripe Si�e Status
64KB 465.8GB Normal
Si�e Type/Status(Vol ID)
Non-RAID Disk
232.9GB Member Disk(0)
298.1GB Member Disk(0)
279.5GB Member Disk(0)
[Enter]-Select Menu
102
Bootable
Yes