Table of Contents
Advertisement
Quick Links
Statement:
This manual is the intellectual property of Foxconn, Inc. Although the
information in this manual may be changed or modified at any time,
Foxconn does not obligate itself to inform the user of these changes.
Trademark:
All trademarks are the property of their respective owners.
Version:
User's Manual V1.0 in English for 865G/GV/PE7MC motherboard.
P/N: 91-181-U65-M7-0E
Symbol description:
Note: refers to important information that can help you to use motherboard
better.
Attention: indicates that it may damage hardware or cause data loss,
and tells you how to avoid such problems.
Warning: means that a potential risk of property damage or physical
injury exists.
More information:
If you want more information about our products, please visit Foxconn's
website: www.foxconnchannel.com
1
2004-9-11, 10:50
Advertisement
Table of Contents
Related Manuals for Foxconn 865G
Summary of Contents for Foxconn 865G
- Page 1 This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modified at any time, Foxconn does not obligate itself to inform the user of these changes. Trademark: All trademarks are the property of their respective owners.
- Page 2 Item Checklist: Thank for your purchasing Foxconn’s 865G/GV/PE7MC motherboard. Please check the package; if there are missing or damaged items, contact your distributor as soon as possible. 865G/GV/PE7MC motherboard (x1) Foxconn Utility CD (x1) User Manual (x1) IDE Ribbon cable (x1)
-
Page 3: Declaration Of Conformity
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT, TAIPEI HSIEN, TAIWAN, R.O.C. declares that the product Motherboard 865G/GV/PE7MC is in conformity with (reference to the specification under which conformity is declared in accordance with 89/336 EEC-EMC Directive) EN 55022/A1: 2000... - Page 4 Declaration of conformity Trade Name: Foxconn 865G/GV/PE7MC Model Name: Industry Inc. Responsible Party: Address: 458 E. Lambert Rd. Fullerton, CA 92835 Telephone: 714-738-8868 Facsimile: 714-738-8838 Equipment Classification: FCC Class B Subassembly Type of Product: Motherboard Manufacturer: HON HAI PRECISION INDUSTRY...
- Page 5 Table of Contents Chapter Product Introduction 865G/GV/PE7MC Chapter Installation Instructions Supply .................... Chapter BIOS Description Standard CMOS Features ................27 BIOS Features ................... Advanced BIOS Features ................Advanced Chipset Features ..............Integrated Peripherals ................Power Management Setup ................. PnP/PCI Configurations ................
- Page 6 Warning: 1. Attach the CPU and heatsink using silica gel to ensure full contact. 2. It is suggested to select high-quality, certified fans in order to avoid damage to the motherboard and CPU due high temperatures. 3. Never turn on the machine if the CPU fan is not properly installed. 4.
- Page 7 Chapter Thank you for buying Foxconn’s 865G/GV/PE7MC motherboard. This series of motherboard is one of our new products, and offers superior performance, reliability and quality, at a reason- ® able price. This motherboard adopts the advanced Intel 865G/ GV/PE+ ICH5 chipset, providing users a computer platform with a high integration-compatibility-performance price ratio.
- Page 8 Supports FSB at 533MHz/800MHz Supports Hyper-Threading technology Chipset Intel ® Springdale chipset: Intel ® 865G/GV/PE (North Bridge) + ICH5 (South Bridge) System Memory Two 184-pin DIMM slots Supports PC 3200/2700/2100 memory Supports 64/128/256/512 Mb technology up to 2GB Supports Dual-channel DDR USB 2.0 Ports...
- Page 9 Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4 (Suspend to disk - depends on OS), and S5 (soft - off). Expansion Slots Three PCI slots One AGP slot (supported on 865G/PE7MC only) Advanced Features PCI 2.3 specification compliant Supports Windows 98/2000/ME/XP soft-off...
- Page 10 8.FAN1 connector 20.North Bridge: 865G/GV/PE chipset 9.Clear CMOS jumper 21.CPU socket 10.BIOS protection jumper 22.AGP slot (only for 865G/PE7MC) 11.Front panel connector 23.4-pin ATX_12V power connnector 12.Chassis intruder connector Note: The above motherboard layout is provided for reference only; please refer to the physical motherboard.
- Page 11 Caution should be exercised during the installation of these modules. Please refer to the motherboard layout prior to any installation and read the contents in this chapter carefully. This chapter includes the following information: Memory Power supply Rear Panel Connectors Other Connectors Expansion Slots Jumpers 865G/GV/PE7MC User Manual...
- Page 12 Installation Instructions ® This motherboard supports single Pentium 4 Processor including Prescott desktop CPUs in an LGA 775 package. It also supports Hyper-Threading Technology. Installation of CPU Load lever Load plate Load cap Load stiffener gLoa Lifted tab 865G/GV/PE7MC User Manual...
- Page 13 Chapter 2 Installation Instructions Correct Wrong Lift up the lever. Use thumb to open the load plate. Be careful not to touch the contacts. 865G/GV/PE7MC User Manual...
- Page 14 Therefore, you should install CPU cooling fan and make sure that the cooling fan works normally at all times in order to prevent overheating and damaging to the CPU. Please refer to your CPU fan user guide to install it properly. 865G/GV/PE7MC User Manual...
- Page 15 The following table lists the CPUs that have been tested and qualified for use with this motherboard. Vendor Type Frequency Intel Pentium (Prescott) 2.8G Intel Pentium (Prescott) 2.8G Intel Pentium (Prescott) 3.0G Intel Pentium (Prescott) 3.2 G Intel Pentium (Prescott) 3.6 G Intel P4EE 3.4 G 865G/GV/PE7MC User Manual...
- Page 16 256MB Samsung PC3200 (DDR400) 512MB Micron PC3200 (DDR400) 256MB KingMax PC3200 (DDR400) 256MB KingMax PC3200 (DDR400) 512MB Nanya PC3200 (DDR400) 256MB Transcend PC3200 (DDR400) 512MB KingSton PC3200 (DDR400) 512MB KingSton PC3200 (DDR400) 256MB Samsung PC3200 (DDR400) 512MB 865G/GV/PE7MC User Manual...
- Page 17 1. When using FSB 800MHz CPU, PC2700DDR DIMMs may run only at 320MHz(not 333MHz) due to chipset limitation. 2. The following FSB/DDR ratios are not supported: 400/333, 400/400. 4. Double-sided DDR DIMMs with X16 (databus width=16-bit) memory chips are not supported due to chipset limitations. 865G/GV/PE7MC User Manual...
- Page 18 3. The plastic clips at both sides of the DIMM slot will lock automatically. Warning : Be sure to unplug the AC power supply before adding or removing expansion cards or other system peripherals, especially the memory devices, otherwise your motherboard or the system memory might be seriously damaged. 865G/GV/PE7MC User Manual...
- Page 19 Attention: You have to press the power button for more than four seconds if you change the default “Instant-Off” setting to “Delay 4 Sec.” from the “Soft-Off by PWR-BTTN” option in the BIOS Power Manage- ment Setup. 865G/GV/PE7MC User Manual...
- Page 20 This 9-pin COM1 port is for pointing devices or other serial devices. Parallel Port (Printer Port) This 25-pin port connects a parallel printer, a scanner, or other devices. VGA Port (Only for 865G/GV7MC) The VGA Port is for output to a VGA-compatible device. 1394 Port (Optional) This digital interface supports electronic devices such as digital cameras, scanners, and printers.
- Page 21 Microphone input, as shown in the following figure: Blue Green Center Front Left Front Right Rear Left Rear Right Subwoofer 865G/GV/PE7MC User Manual...
- Page 22 This motherboard includes one connector for connect- IDE_LED PLED ing the front panel switch and LED indicators. PWRBTN# R E S E T IDE LED Connector (IDE_LED) The connector connects to the case’s IDE indicator LED indicating the activity status of hard disks. 865G/GV/PE7MC User Manual...
- Page 23 These connectors support the thin GND GND Serial ATA cables for primary internal storage devices. The current Serial ATA interface allows up to 150MB/s data transfer rate, faster than the standard parallel ATA with 133MB/s (Ultra ATA/133). SATA _1/SATA _2 865G/GV/PE7MC User Manual...
- Page 24 Besides four USB ports on the rear panel, the series of motherboards also have two 10-pin headers on board which may connect to front panel USB cable(optional) to provide additional four USB ports. Empty Empty F_USB 1 F_USB 2 865G/GV/PE7MC User Manual...
- Page 25 TPA + TPA - F_1394 IrDA Header: IR This connector supports wireless transmitting and re- ceiving device. Before using this function, configure the settings of IR Mode from the “Integrated Peripher- Empty als” section of the CMOS Setup. 865G/GV/PE7MC User Manual...
- Page 26 BIOS setup. AGP Slot (only for 865G/PE7MC) This motherboard has Accelerated Graphics Port (AGP) slot that only supports 1. 5V AGP card. When you use an AGP card, make sure that your AGP card with 1.
- Page 27 MSI TI4200 128MB Unika UNIKA 7917 Geforce4 MX440 64MB Note: Make sure to use only the tested and qualified AGP cards listed above. Other AGP cards manufactured by other vendors may not be suitable for this motherboard. 865G/GV/PE7MC User Manual...
- Page 28 2.Return the jumper setting to normal (pins 2 and 3 to CLS CMOS gether with the jumper cap). 3.Turn the AC power supply on. Warning: 1. Disconnect the power cable before adjusting the jumper settings. 2. Do not clear the CMOS while the system is turned on. 865G/GV/PE7MC User Manual...
- Page 29 BIOS is protected from being attacked by (Default) a serious virus, such as the CIH virus. You will be unable to flash the BIOS to the motherboard when the Flash write system BIOS is protected. Disabled TBL_EN 865G/GV/PE7MC User Manual...
- Page 30 Appendix Chapter This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS pa- rameters are also provided. You have to run the Setup Program when the following cases occur: 1. An error message appears on the screen during the system POST process.
- Page 31 Main Menu The items in the main menu are explained below: Standard CMOS Features The basic system configuration can be set up through this menu. BIOS Features The special features can be set up through this menu. 865G/GV/PE7MC User Manual...
- Page 32 Set Supervisor/User Password The supervisor/user password can be set up through this menu. Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. 865G/GV/PE7MC User Manual...
- Page 33 Access Mode to “CHS”, the related information should be entered manually. Enter the information directly from the keyboard and press < Enter>: Cylinder number of cylinders Head number of heads Precomp write pre-compensation Landing Zone landing zone Sector number of sectors 865G/GV/PE7MC User Manual...
- Page 34 The system boot will not stop for a diskette error; but it will stop for all other errors. All, But Disk/Key The system boot will not stop for a keyboard or disk error, but it will stop for all other errors. 865G/GV/PE7MC User Manual...
- Page 35 The BIOS POST will determine the amount of base (or conventional) memory installed in the system. Extended Memory The BIOS determines how much extended memory is present during the POST. Total Memory Total memory of the system. 865G/GV/PE7MC User Manual...
- Page 36 CPU can be overclocked by keying in the desired in the CPU clock range. For more detailed information, please visit our website: http://www.foxconnchannel.com.cn Warning: Be sure your selection is right. CPU overclock will be dangerous! We will not be responsible for any damage caused. 865G/GV/PE7MC User Manual...
- Page 37 Threading has been installed. First/Second/Third Boot Device (Default: Floppy/Hard Disk/CDROM) This option allows you to set the boot device sequence. The available setting values are: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, LAN and Disabled. 865G/GV/PE7MC User Manual...
- Page 38 Note: The following options are used to set Prescott CPU. Thermal Management (Default: Thermal Monitor 1) This option is used to manage Prescott CPU thermal. Limit CPUID MaxVal (Default: depend on CPU) (optional) This option is used to set limit CPUID maxval. 865G/GV/PE7MC User Manual...
- Page 39 This item is used to set which display device will be used first when your PC starts up. The available setting values are: Onboard/AGP and PCI Slot. Note: The following three options will appear when use 865G/GV chipsets. On-Chip VGA (Default: Enabled) This item is used to enable or disable onboard VGA.
- Page 40 Enhanced Mode, six HDDs at most will be supported (for those under Windows 2000 and Windows XP only); with it set to SATA Only, only the S-ATA HDD can be used. 865G/GV/PE7MC User Manual...
- Page 41 Onboard Device Menu AC97 Audio (Default: Auto) This option is used to set whether onboard AC97 Audio is enabled. Onboard LAN controller (Default: Enabled) This option is used to set whether the onboard LAN controller is enabled. 865G/GV/PE7MC User Manual...
- Page 42 This option is used to set what action the PC will take with the power supply when it resumes after a sudden power failure. The available options are Off (remain in turn off status), On (power on) and Former-Sts (resume with the previous status). 865G/GV/PE7MC User Manual...
- Page 43 If this item is enabled, it allows the system to resume from a software power down or power saving mode whenever there is an incoming call to an installed fax/modem. This function needs to be supported by the relevant hardware and software. 865G/GV/PE7MC User Manual...
- Page 44 If the ISA cards you installed are not sup- porting PnP, you will need to select “Manual” and manually adjust interrup- tion resources in the event of hardware conflicts. However, since this motherboard has no ISA slot, this option does not apply. 865G/GV/PE7MC User Manual...
- Page 45 This item is used to set the tolerance value of the CPU temperature. CPU Fan Output Stop Value (Default: 8) This item is used to define the minimum RPM (Revolutions Per Minute) value of the CPU fan. 865G/GV/PE7MC User Manual...
- Page 46 CPU fan begins to slow down. If the CPU temperature always stays below the difference value, the CPU fan will finally decrease to the Value3 setting (RPM equals to the RPM limit of CPU FAN, multiplied by Value3 setting value, then divided by 16). 865G/GV/PE7MC User Manual...
- Page 47 8 to a maximum of 50. Note: This option is invisible for locking frequency CPU. Warning: Be sure your selection is right. CPU overclock will be dangerous! We will not be responsible for any damage caused. 865G/GV/PE7MC User Manual...
- Page 48 Enter Password: Enter your password, not exceeding 8 characters, then press <Enter>. The password you entered will replace any previous password. When prompted, key in the new password and press <Enter>. 865G/GV/PE7MC User Manual...
- Page 49 If you select this option and press <Enter>, the following message will appear in the center of the screen: Quit Without Saving (Y/N) ? N Press <Y> to exit CMOS without saving your changes; press <N> or <ESC> to return to the main menu screen. 865G/GV/PE7MC User Manual...
- Page 50 Chapter The utility CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features. This chapter includes the following information: Utility CD content Start to install drivers...
- Page 51 SuperUpdate function can help to update the BIOS through Internet directly. For more detailed information, please visit our website: http://www.foxconnchannel.com B. Adobe Reader C. Norton Internet Security 2004 3. Browse CD Click here to browse CD content. 4. Homepage Click here to visit Foxconn motherboard homepage. 865G/GV/PE7MC User Manual...
- Page 52 Click <Install Driver> to enter the driver installation menu (as shown in Figure 1). Click the relevant buttons to install Chipset Software, DirectX 9.0b, VGA Driver, USB2.0 Driver, Audio Driver and LAN Driver (optional) from this CD. Follow the screen order to install the motherboard drivers 865G/GV/PE7MC User Manual...