Foxconn BLACKOPS User Manual page 56

► Read to Precharge (tRTP)
This item is used to set the read CAS to precharge time (in clock cycles).
► All Precharge to Refresh All Precharge to Refresh
This item is used to set the all precharge to refresh delay(in clock cycles).
► Refresh Period Ratio
This item is used to set refresh period ratio.
► Refresh Period (tREF)
This item is used to set refresh period(in clock cycles).
► Command Per Clock Per Clock
This item is used to set the Command per clock for your memory (in clock cycles).
► Read Delay Phase (tRD)
This item is used to set the read delay phase (in clock cycles).
All Voltage Control
******** Affect CPU MH� ********
CPU Voltage Multiplier
CPU Voltage Setting
CPU Target Voltage
CPU Current Voltage
CPU Default Voltage
CPU Vdroop Compensation
******** Affect FSB MH� ********
CPU PLL Voltage Setting
CPU VTT Voltage Setting
CPU GTL Ref. 0 Voltage
CPU GTL Ref. 1 Voltage
CPU GTL Ref. 2 Voltage
CPU GTL Ref. 3 Voltage
NB Voltage Setting
NB GTL Ref. Voltage
SB Voltage Setting
↑↓��������:Move Enter:Select
F5:Previous Values
********Affect CPU MHz********
► CPU Voltage Multiplier
This item is used to set CPU Voltage Multiplier.
► CPU Voltage Setting
This item is used to set CPU Voltage.
► CPU Target/Current/Default Voltage CPU Target/Current/Default Voltage Target/Current/Default Voltage
These items show the Target/Current/Default CPU Voltage.
NOTE: The CPU Target Voltage equal to "CPU Voltage Multiplier" multiply "CPU Voltage CPU Target Voltage equal to "CPU Voltage Multiplier" multiply "CPU Voltage Target Voltage equal to "CPU Voltage Multiplier" multiply "CPU Voltage
Setting" .
► CPU Vdroop Compensation
This item is enable or disable CPU vdroop compensation.
********Affect FSB MHz********
► CPU PLL Setting
This item is used to set DRAM Voltage. The default voltage is 1.890V.
► CPU VTT Voltage Setting
This item is used to set CPU VTT Voltage. The default voltage is 1.200V.
Phoenix - AwardBIOS CMOS Setup Utility
All Voltage Control
x 1.000
x 1.000
1.2500V
1.2500V
1.2540V
1.2500V
Disabled
1.508861V
1.200V
Default
Default
Default
Default
1.250V
Default
1.500V
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
49
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults