Multitech FaxFinder FF130 Administrator's Manual page 100

Appendix B: Customization
INLINE-COMMENTS=true|false
●
If inline comments are true, the first part of the message body is used as cover page comments. If
false, it is not. By default, this is true. Change this by setting /INLINE-COMMENTS=false.
Example:
FAX=5551234/INLINE-COMMENTS=false@example.test
FAX-PRIORITY=0-5
●
The fax priority specifies the order of scheduling (0 is highest and 5 is lowest).
Example:
FAX=5551234/FAX-PRIORITY=5@example.test
RECEIPT=always|failure|never
●
Controls when an email receipt for the fax is sent to the sender:
always means send an email receipt for successful and failed faxes
●
failure means only send a receipt if the fax failed to send
●
never means don't send any receipt
●
Example:
FAX=5551234/RECEIPT=failure@example.test
RECEIPT-ATTACHMENT=pdf|tiff|none
●
Determines the receipt format and if FaxFinder sends email receipts to the sender.
●
pdf attaches the sent fax in PDF format to any email receipts
●
tiff attaches the sent fax in TIFF format
●
none does not attach the sent fax
Example:
RECEIPT-ATTACHMENT=pdf
Multiple Options Example
The following example shows the format to use when combining multiple variants for sending a fax.
Using these commands will override the settings on the T.37 configuration page.
Parameters
Send a fax to the phone number 111-555-1234 with a cover page noting the recipient as "John Smith" at
the company "Multitech".
String of T.37 options:
FAX=111-555-1234/COVER-PAGE-ENABLED=true/ATTN=John Smith/ORG=Multitech@example.test
Relaying
To send faxes through an MTA such as mail.multitech.com, then mail.multitech.com needs to be
configured to forward mail to the FaxFinder for a domain that FaxFinder will accept mail for.
For most mail servers, if the email's domain can be successfully resolved, the mail server will forward
mail to that destination without any extra configuration.
100 FaxFinder Administrator User Guide