Console/Command Port Pin Assignments; Front Panel Leds; Faxfinder 130/230 (Ff230 Shown) - Multitech FaxFinder FF130 Administrator's Manual

Chapter 2: Getting Started
7.
Power Connector. Threaded connector for the provided power supply.
8.
Power Socket. Power receptacle for provided power cord.
9.
Power Switch. On/Off power switch for the FaxFinder 430/830 units.

Console/Command Port Pin Assignments

Front Panel LEDs

FaxFinder 130/230 (FF230 shown)

Label Name
Power Power
Status Status
CF Compact Flash
LNK Data Link
100 Speed
TD Transmit Data
RD Receive Data
TR Data Terminal Ready
CD Carrier Detect
18
Pin 1 CD
Pin 2 RCV
Pin 3 XMT
Pin 4 DTR
Pin 5 Ground
Pin 6 DSR
Pin 7 RTS
Pin 8 CTS
Pin 9 Ring
Solid (constant) green if unit is on.
A few moments after power is on, the Status LED will be blinking
green to show normal, working state.
When the compact flash drive is accessed, this LED will light.
Lit when a physical link has been established with the Ethernet
network.
When lit, Ethernet rate is 100 MHz; when unlit rate is 10 MHz.
The TD LED flashes when the modem is transmitting data to
another modem.
The RD LED flashes when the modem is receiving data from
another modem.
Indicates that server is in communication with the modem.
Carrier of remote modem is detected.
Description
FaxFinder Administrator User Guide