Connections - Multitech FaxFinder FF130 Administrator's Manual

5.
Remove feet (4) from the FaxFinder unit.
6.
Mount the FaxFinder in the rack enclosure per the rack manufacture's mounting procedure.

Connections

The images below show the back panels for FaxFinder x30 models. Following that is a description of the
connections called out in the image.
1.
Line Ports. PSTN/POTS RJ 11 phone line connectors.
2.
LAN/Ethernet Port. RJ 45 receptacle for network connection. The FaxFinder 130/230 units for
reasons of space constraints are labeled LAN, while the FF430/830 units show Ethernet.
3.
Console/Command Port. DE-9 connection for serial access and control of the FaxFinder units.
4.
Reset. (FF130/230) Access hole for reset button (use a straightened paper clip or similar tool to push
the recessed button).
5.
Reboot. Pushing and releasing the button once will reboot the FaxFinder.
6.
Reset (FF430/830). Holding the button in for 3 seconds and releasing will reset the FaxFinder to
factory defaults.
FaxFinder Administrator User Guide
Chapter 2: Getting Started
17