[64] Central processing unit (PBA) underneath the operating panel
Loosen the fan connectors which are located on the cover of the printed board
3
under the operating panel (see figure 64).
Unscrew the cover of the printed board.
4
Loosen the connectors.
5
Unscrew the printed board.
6
Remove the blue plastic (battery) holder from the printed board.
7
If you cannot dispose of the printed board as toxic waste, you may return it to:
Océ-Technologies B.V., P.O.Box 101, 5900 MA Venlo, The Netherlands.
94
Océ 3165 Key Operator Manual