Changing The Initial Operating Mode On A Network Copier - Oce 3165 Operator's Manual

Changing the initial operating mode on a Network Copier

If the Océ 3165 Network Copier is used mainly for printing, you may decide
to set the print mode as initial mode. In that case, users of the Network Copier
must switch to the copy mode first before they can make a copy. And, of
course, if the Network Copier is used mainly for copying, you should set the
initial operating mode to copying.
Depending on the selected mode, you may want to change the time delay
Note:
for printing (see 'Defining the time delay for print jobs' on page 36).
[9] Initial operating mode set to copying
[10] Initial operating mode set to printing
Changing the initial operating mode
Access the key operator system (see page 13).
1
Open the 'Machine' section and select the 'Defaults' settings.
2
Press the function button 'Standard usage' to change the current standard
3
mode setting (see figure 7).
Quit the key operator system.
4
Configuration management 21