Defining Paper Trays For Reports - Oce 3165 Operator's Manual

Defining paper trays for reports
The Océ 3165 has four paper trays, which may contain different paper sizes. If
the Océ 3165 is used a lot for reproducing reports, you can assign trays to be
used for covers, separation sheets and/or appendices.
The specified tray(s) must be loaded with the same paper size as the paper size
of the 'normal' pages. When a user selects covers, separation sheets or
appendices, the paper in the specified tray will be used automatically.
The paper trays for covers, separation sheets or appendices can be set in the
'Machine' section. For each selectable tray the currently available paper size
and orientation in that tray is also shown.
[13] Paper tray settings for reports
Defining special paper trays
Access the key operator system (see page 13).
1
Open the 'Machine' section and select the 'Paper trays' settings.
2
Press the function button 'Tray for covers' as often as needed to select the tray
3
to be used for covers.
Repeat step 3 for the functions 'Tray separation sheets' and/or 'Tray for
4
appendix' to select the trays to be used for separation sheets and/or appendices.
When ready, quit the key operator system.
5
24 Océ 3165 Key Operator Manual