Oce 3165 Operator's Manual page 16

Switching the DAC off
Access the key operator system (see page 13).
1
Open the 'Printing' section and select 'DAC control' settings with the arrow
2
buttons.
Press the 'Stop DAC' function button.
3
Press start (
4
[6] DAC is stopped, printing is no longer possible
Wait 20 seconds for the DAC to shut down.
5
Insert the key into the DAC and turn it counter clockwise to vertical position.
6
Press the on/off switch on the DAC to switch it off.
7
Turn the key clockwise into horizontal position again and remove it.
8
Quit the key operator system.
9
Switching the DAC on
Insert the key and turn it to the left into vertical position to unlock the on/off
1
switch.
Press the on/off switch on the DAC.
2
Turn the key to the right into horizontal position to lock the on/off switch again
3
and remove the key.
16 Océ 3165 Key Operator Manual
) to confirm (see figure 6).