Accessing The Key Operator System - Oce 3165 Operator's Manual

Accessing the key operator system

To perform management and maintenance tasks, you must first access the key
operator system. As this functionality is restricted to a dedicated user, a PIN
code is required. At installation the service technician configures the key
operator PIN code. This means that only the service technician can change it.
Having performed key operator activities, make sure you quit the key operator
system to prevent improper use of the Océ 3165. Any changes you make in the
settings will only be applied after quitting the key operator system.
When the machine has an error for which you need to call the service
Note:
technician, you cannot use the key operator mode.
Accessing the key operator system
Open section 'Extra' and select 'Special settings'
1
Press the function button 'System management' to select 'Key Operator'.
2
Press start (
3
Enter the PIN code using the copy quantity buttons.
4
After a few seconds (if the PIN code you entered is correct), the key operator
5
system is available to you.
[2] Key operator system
Quitting the key operator system
Open the section 'Basic' and press function button 'Quit key operator system'
1
Press start (
2
Any changes you made in the key operator system will now be active.
Introduction
) to confirm.
) to confirm.
13